Panasonic PT-DS20KE, PT-DW17KE, PT-DZ21KE [3D INPUT FORMAT], [LEFT/RIGHT SWAP], [3D COLOR MATCHING], [3D SETTINGS] menu (PT‑DZ21KE and PT‑DS20KE only)

[3D SETTINGS] menu (PT‑DZ21KE and PT‑DS20KE only)

Settings

[3D INPUT FORMAT]

Set the 3D format for the image signals being input. Set a 3D format that matches the input signal.

1) Press ▲▼ to select [3D INPUT

FORMAT].

2) Press the <ENTER> button.

zzThe [3D INPUT FORMAT] screen is displayed.

3)Press ▲▼ to select a 3D format.

4)Press the <ENTER> button.

	[AUTO]*1	Automatically detects 3D format of
	[AUTO]*1	input image signals and displays
		images.
	[NATIVE]	Forcibly displays images in 2D
	[NATIVE]	regardless of input image signals.
		regardless of input image signals.
	[SIMULTANEOUS]*2	Forcibly displays 3D images in
	[SIMULTANEOUS]*2	simultaneous format regardless of
		input image signals.
	[SIDE BY	Forcibly displays 3D images in side
	[SIDE BY	by side format regardless of input
	SIDE]	by side format regardless of input
	SIDE]	image signals.
		image signals.
	[TOP AND	Forcibly displays 3D images in top
	[TOP AND	and bottom format regardless of
	BOTTOM]	and bottom format regardless of
	BOTTOM]	input image signals.
		input image signals.
	[LINE BY	Forcibly displays 3D images in line
	[LINE BY	by line format regardless of input
	LINE]*3	by line format regardless of input
	LINE]*3	image signals.
		image signals.
	[FRAME	Forcibly displays 3D images in frame
	[FRAME	sequential format regardless of input
	SEQUENTIAL]*4	sequential format regardless of input
	SEQUENTIAL]*4	image signals.

*1: During DVI-D or HDMI input only

*2: During 3G-SDI level B input only

*3: During signals other than interlaced signals are input

*4: During RGB1, RGB2, DVI-D, and HDMI input only

Note

zzWhen set to [AUTO], [SIMULTANEOUS], [SIDE BY SIDE], [TOP AND BOTTOM], [LINE BY LINE], or [FRAME SEQUENTIAL], images are not displayed in 3D as per the [3D SIMUL INPUT SETTING]. However, this only occurs in [AUTO] when 3D format can be recognized.

zzThis may not function properly for some external devices that are connected.

[LEFT/RIGHT SWAP]

Flips the timing of the switch between the left and right of an image to display. Change the setting if the 3D images you see appear strange.

1)Press ▲▼ to select [LEFT/RIGHT

SWAP].

2)Press ◀▶ to switch [LEFT/RIGHT

SWAP].

zzThe setting will change as follows each time you press the button.

[NORMAL][SWAPPED]

If the 3D images are displayed

[NORMAL] correctly, do not change the [NORMAL] settings.

Select when left and right 3D

[SWAPPED] images are swapped to be

displayed.

Note

zzThis is disabled when [3D SYSTEM SETTING] is set to any setting other than [SINGLE].

[3D COLOR MATCHING]

Switches the color matching correction data applied to the displayed image.

1)Press ▲▼ to select [3D COLOR

MATCHING].

2)Press ◀▶ to switch [3D COLOR

MATCHING].

zzThe setting will change as follows each time you press the button.

[SHARED 2D/3D] [SEPARATE 2D/3D]

[SHARED 2D signals and 3D signals use the

2D/3D] same correction data.

[SEPARATE 2D signals and 3D signals use

2D/3D] different correction data.

Note

zzKeep the signal you want to adjust input when you switch the [COLOR MATCHING] ( page 88) setting.

84 - ENGLISH