About your projector

■■Bottom

 

You can attach a commercial burglar prevention cable.

 

 

(22) Burglar hook port

 



Attention

 

 

 

 

zzKeep your hands and other objects away from the

 

 

air exhaust port.

 

 

– Keep your hands and face away.

 

 

– Do not insert your fingers.

 

 

– Keep heat-sensitive objects away.

 

 

Heated air from the air outlet port can cause bums,

)URQW

 

injury, or deformations.

 

zzDo not block the ventilation ports (intake and



 

exhaust) of the projector.

 

 

■■Control panel

Preparation

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(1)Power standby < > button

Sets the projector to the standby mode when the <MAIN POWER> switch on the projector is set to <ON>.

(2) Power on < > button

Starts projection when the <MAIN POWER> switch on the projector is set to <ON> when the power is switched off (standby mode).

(3)<VIDEO> button Switches to VIDEO input.

(4)<RGB1> button Switches to RGB1 input.

(5)<RGB2> button Switches to RGB2 input.

(6)<DVI-D> button Switches to DVI-D input.

(7)<HDMI> button Switches to HDMI input.

(8)<SDI 1/2> button Switches to SDI input.

(Only for PT-DZ21KE, PT-DS20KE)

(9)Input selection terminal indicator

Indicator which shows the selected input terminal. This lights up when an image signal is being input in the selected input terminal, and flashes when there is no image signal.

(10)<AUTO SETUP> button

Automatically adjusts the image display position while projecting the image.

[PROGRESS] is displayed on the screen while the image is adjusted automatically. ( page 59)

(11)

(12)

(13)

(14)

(15)

(16) (17)

(11)<MENU> button Displays the main menu.

Returns to the previous menu when the menu is displayed.

( page 61)

If you press the <MENU> button on the control panel for at least three seconds while the on-screen indication is off, the on-screen display is turned on.

(12)<LENS> button

Adjusts the focus, zoom, and shift (position) of the lens.

(13)<ENTER> button

Determines and executes an item in the menu screen.

(14)<SHUTTER> button

Used to temporarily turn off the image. ( page 58)

(15)▲▼◀▶ buttons

Use to select items in the menu screen, change settings, and adjust levels.

It is also used to enter [SECURITY] passwords.

(16)<LIGHT> switch

Light switch for the connecting terminals and the control panel.

(17)Self-diagnosis display

Automatically shows errors and warnings, and their details. ( page 153)

ENGLISH - 25