Settings

[DISPLAY OPTION] menu

[RGB IN] (supported during RGB

signal input only)

Set to match the signal to input to the <RGB 1 IN> terminal.

1) Press ▲▼ to select [RGB IN].

2) Press the <ENTER> button. zzThe [RGB IN] screen is displayed.

3) Press ▲▼ to select an item.

■■To set [RGB1 INPUT SETTING]

4)Select [RGB1 INPUT SETTING] in Step 3).

5)Press ◀▶ to switch [RGB1 INPUT

SETTING].

zzThe setting will change as follows each time you press the button.

[RGB/YPBPR][Y/C]

[RGB/YPBPR] Select when inputting an RGB signal to the <RGB 1 IN> terminal.

Select when inputting a luminance

[Y/C] signal and color signal to the <RGB 1 IN> terminal.

■■To switch the slice level of an input sync signal

4)Select [RGB1 SYNC SLICE LEVEL] or [RGB2 SYNC SLICE LEVEL] in Step 3).

5)Press ◀▶ to switch the [RGB1 SYNC

SLICE LEVEL] or the [RGB2 SYNC

SLICE LEVEL].

zzThe setting will change as follows each time you press the button.

[LOW][HIGH]

[LOW] Set the slice level to [LOW].

[HIGH] Set the slice level to [HIGH].

[DVI-D IN]

Switch the setting when the external equipment is connected to the <DVI-D IN> terminal of the projector and the image is not projected correctly.

1) Press ▲▼ to select [DVI-D IN].

2) Press the <ENTER> button. zzThe [DVI-D IN] screen is displayed.

3) Press ▲▼ to select [DVI EDID].

4) Press ◀▶ to switch [DVI EDID]. zzThe setting will change as follows each time

you press the button.

[EDID3] [EDID1] [EDID2:PC]

[EDID3]

Switch between fine settings for a

moving image and for a still image.

 

 

Select mainly when an external

[EDID1]

device that outputs movie-type

image signals (such as a blu-ray

 

disk player) is connected to the

 

<DVI-D IN> terminal.

 

Select mainly when an external

[EDID2:PC]

device that outputs still image-

type signals (such as a computer)

 

is connected to the <DVI-D IN>

 

terminal.

5)Press ▲▼ to select [DVI SIGNAL

LEVEL].

6)Press ◀▶ to switch [DVI SIGNAL

LEVEL].

zzThe setting will change as follows each time you press the button.

[0-255:PC][16-235]

Select when an external device [0-255:PC](such as a computer) is connected

via DVI-D terminal output.

Select when an external device (such as a blu-ray disc player)

[16-235]is connected via HDMI terminal output by use of a conversion cable or similar cable.

Note

zzThe optimal setting is different depending on the output setting of the connected external equipment. Refer to the instruction manual of the external equipment regarding the output of the external equipment.

zzThe data for Plug and play will change when the setting is changed. Refer to “List of compatible signals” ( page 167) for a resolution that supports plug and play.

92 - ENGLISH