Switching on/off the projector

3)

1)

2)

4)

1)

 

 

 

 

 

 

 

 

2)

Switching off the projector

1)Press the power standby <> button.

2)Press ◀▶ to select [OK], and press the <ENTER> button.

(Or press the power standby < >

button again)

zzProjection of the image will stop, and the power indicator <ON (G)/STANDBY (R)> on the projector lights in orange.

(The fan keeps running.)

3)Wait until the power indicator <ON (G)/STANDBY (R)> of the projector lights in red (and the fan stops) for approximately 170 seconds.

4)Press the <OFF> side of the <MAIN POWER> switch to turn off the power.

Note

zzDo not turn on the power and project images immediately after turning the projector off. Turning on the power while the lamp is still hot may shorten the lamp life.

zzIn about 75 seconds after the projector is switched off and the luminous lamp cooling is started, the lamp indicators will not light up even if the power is switched on. Even after 75 seconds, the lamp may not light up if the power is switched on. After the power indicator <ON (G)/STANDBY (R)> lights in red, turn on the power again.

zzThe projector consumes power even when the

power standby < > button is pressed and the power is switched off if the projector’s main power is on.

Refer to “Power consumption” ( page 172) for the power consumption.

Basic Operation

ENGLISH - 51