Precautions for use

PP  RUPRUH

PP  RUPRUH

PP  RUPRUH

Important

Information

PP  RUPRUH

zzDo not install the projector in a confined space.

When it is necessary to install the projector in a confined space, install the air conditioning or ventilation separately. Exhaust heat may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.

Security

When using this product, take safety measures against the following incidents. zzPersonal information being leaked via this product

zzUnauthorized operation of this product by a malicious third party zzInterfering or stopping of this product by a malicious third party

Take sufficient security measures. ( pages 121, 140) zzMake your password difficult to guess as much as possible. zzChange your password periodically.

zzPanasonic Corporation or its affiliate companies will never ask for your password directly. Do not divulge your password in case you receive such inquiries.

zzThe connecting network must be secured by a firewall, etc.

zzSet a password for the web control and restrict the users who can log in.

Disposal

To dispose of the product, ask your local authorities or dealer for correct methods of disposal.

The lamp contains mercury. When disposing of used lamp units, contact your local authorities or dealer for correct methods of disposal.

Cautions on use■■To get a good picture quality

In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen.

■■Do not touch the surface of the projection lens with your bare hands.

If the surface of the projection lens becomes dirty from fingerprints or anything else, this will be magnified and projected onto the screen. Please put the lens cover (accessory) on the projector when you do not use it.

■■DLP chips

zzThe DLP chips are precision-made. Note that in rare cases, pixels of high precision could be missing or always lit. This is not a malfunction.

zzDirecting a high-power laser beam onto the lens surface can damage the DLP chips.

■■Do not move the projector while it is operating or subject it to vibration or impact.

Doing so may shorten the service life of its internal components.

■■Lamp

The luminous source of the projector is a high-pressure mercury lamp.

A high-pressure mercury lamp has the following characteristics.

18 - ENGLISH