Operation Basic

Remote control operation

Displaying the internal test pattern

The projector has eight types of internal test patterns to check the condition of the set. To display test patterns, perform the following steps.

button

1)Press the <TEST> button on the remote control.

2)Press the ◀▶ button to select the test pattern.

Note

zzSetting is also available from the [TEST PATTERN] menu ( page 117).

zzSettings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various adjustments.

Changing the picture aspect ratio

You can toggle through aspect ratios to select the one that is appropriate for the input signal.

button

Press the <ASPECT> button on the remote control.

zzThe setting will change as follows each time you press the button.

[VID AUTO]*1

[DEFAULT] [THROUGH] [16:9] [AUTO]*2

[HV FIT]

[V FIT]

 

[H FIT]

 

[4:3]

*1: Only for video signal and Y/C signal (NTSC) input

*2: Only for RGB (480i or 480p) signal input

Note

zzSome aspect ratios may not be available depending on the input signal.

Refer to “[ASPECT]” ( page 72) for details.

60 - ENGLISH