[3D SETTINGS] menu (PT‑DZ21KE and PT‑DS20KE only)
Settings
[3D FRAME DELAY]
Adjust the timing of the
1)Press ▲▼ to select [3D FRAME
DELAY].
2)Press ◀▶ to switch [3D FRAME
DELAY].
zzValues in the following range change by units of 10 us.
0 us to 25 000 us
[3D TEST MODE]
Set the image display format for use with 3D system adjustments.
1) Press ▲▼ to select [3D TEST MODE].
2) Press ◀▶ to switch [3D TEST MODE]. zzThe setting will change as follows each time
you press the button.
[NORMAL] |
| [SIDE BY |
| [LEFT/LEFT] |
| SIDE] |
| ||
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
[BLACK/ |
| [LEFT/ |
| [RIGHT/ |
RIGHT] |
| BLACK] |
| RIGHT] |
[NORMAL] Standard setting.
The left eye image is displayed [SIDE BY SIDE] on the left, next to the right eye
image displayed on the right.
Both the left eye image and right
[LEFT/LEFT] eye image display the left eye input signal.
Both the left eye image and right
[RIGHT/RIGHT] eye image display the right eye input signal.
The left eye input signal is
[LEFT/BLACK] displayed in the left eye image and a completely black image is
displayed in the right eye image.
A completely black image is
[BLACK/RIGHT] displayed in the left eye image and the right input signal is
displayed in the right eye image.
Note
zzThe [3D TEST MODE] settings return to [NORMAL] when the projector is switched off.
zzThis is disabled when [3D SYSTEM SETTING] is set to any setting other than [SINGLE].
zzThis is disabled when [3D TEST PATTERN] is displayed.
[3D TEST PATTERN]
The 3D test pattern can be used to check operation and make adjustments even without a 3D signal.
1)Press ▲▼ to select [3D TEST
PATTERN].
2)Press ◀▶ to switch [3D TEST
PATTERN].
zzThe setting will change as follows each time you press the button.
Menu screen |
| Menu screen |
| Menu screen |
| + |
| + | |
+ |
|
| ||
| Left: white/ |
| Left: black/ | |
Entry screen |
|
| ||
| Right: black |
| Right: white | |
|
|
| ||
|
|
|
|
|
Note
zzThe 3D test pattern cannot be displayed when the following inputs are selected.
–VIDEO input
–RGB1 input (only when [RGB IN] is set to [Y/C]) zzThis is disabled when [3D SYSTEM SETTING] is
set to any setting other than [SINGLE].
86 - ENGLISH