Settings

[PICTURE] menu

[SYSTEM SELECTOR]

The projector will automatically detect the input signal, but you can set the system method manually when an unstable signal is input. Set the system method matching the input signal.

1)Press ▲▼ to select [SYSTEM

SELECTOR].

2)Press the <ENTER> button.

3)Press ▲▼ to select a system format.

4)Press the <ENTER> button.

■■When using <VIDEO IN> terminal, <G/Y>/<B/PB/C> terminals

Select [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or [PAL60].

Attention

zzSet it to [AUTO] normally.

zzSwitch the setting to the signal method for the TV used.

Note

zzSetting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or [PAL60].

■■When using <RGB 1 IN> terminal, <RGB 2 IN> terminal

zzOnly during 480i, 576i, or 576p signal input

Select [RGB] or [YCBCR].

zzOnly during VGA60 or 480p signal input

Select [VGA60], [480p YCBCR], or [480p RGB].

zzWhen using other movie based input signals

Select [RGB] or [YPBPR].

Note

zzRefer to “List of compatible signals” ( page 167) for compatible signals.

■■When using <DVI-D IN> terminal

zzOnly during 480p or 576p signal input

Select [RGB] or [YCBCR].

zzWhen using other movie based input signals

Select [RGB] or [YPBPR].

Note

zzRefer to List of compatible signals ( page 167) for compatible signals.

zzThis may not function properly for some external devices that are connected.

■■When using the <HDMI IN> terminal

zzOnly during 480p or 576p signal input

Select [AUTO], [RGB], or [YCBCR].

zzWhen using other movie based input signals

Select [AUTO], [RGB], or [YPBPR].

Note

zzRefer to List of compatible signals ( page 167) for compatible signals.

zzThis may not function properly for some external devices that are connected.

70 - ENGLISH