Using the STATUS function

You can display the status of the projector.

button

Press the <STATUS> button on the remote control.

zzThe [STATUS] screen is displayed.

 

STATUS

1/4

 

 

 

 

 

 

 

INPUT

RGB2

 

 

 

SIGNAL NAME

XGA60-A8

 

 

 

 

 

 

 

SIGNAL FREQUENCY

48.36kHz/ 60.03Hz

 

 

 

 

 

 

 

PROJECTOR RUNTIME

140h

 

 

 

LAMP1

68h/ ON/

 

 

 

 

 

 

 

LAMP2

69h/ ON/

 

 

 

 

 

 

 

LAMP3

0h/ OFF/

 

 

 

LAMP4

0h/ OFF/

 

 

 

 

 

 

 

INTAKE AIR TEMP.

27°C/ 80°F

 

 

 

 

 

 

 

OPTICS MODULE TEMP.

33°C/ 92°F

 

 

 

AROUND LAMP TEMP.

33°C/ 92°F

 

 

 

 

 

 

 

REMOTE2 STATUS

DISABLE

 

 

 

 

 

 

 

ENTER SEND STATUS VIA E-MAIL

 

CHANGE

MENU

EXIT

 

 

Note

zzThis can be displayed from the [PROJECTOR SETUP] menu → [STATUS] ( page 109).

Using the Automatic setup function

The automatic setup function can be used to automatically adjust the resolution, clock phase, and picture position when analog RGB signals consisting of bitmap images such as computer signals are being input, or to automatically adjust the picture position when DVI-D/HDMI signals are being input. (Automatic setup does not work for a movie format signal such as an output signal of the blu-ray disc player. ) It is recommended to supply images with a bright white border at the rims and characters with high contrast black and white when the system is in the automatic adjustment mode.

Avoid supplying images that include halftones or gradation, such as photographs and computer graphics.

button

Press the <AUTO SETUP> button on the remote control or the control panel.

zz[COMPLETE] is displayed when it has completed without any problem.

Remote control operation

Note

zzThe CLOCK PHASE may shift even if it has completed without any incident. In such cases, adjust with the [POSITION] menu → [CLOCK PHASE] ( page 74).

zzIf an image with blurred edges or a dark image is input, [INCOMPLETE] may appear or adjustment may not be performed properly even if [COMPLETE] appears. In this case, adjust the settings in

the [ADVANCED MENU] menu → [INPUT RESOLUTION] ( page 78), [POSITION] → [CLOCK PHASE] ( page 74), [SHIFT] ( page 72).

zzAdjust specific signals according to the [DISPLAY OPTION] menu → [AUTO SETUP] ( page 91). zzAutomatic adjustment may not work depending on

the model of the computer. zzAutomatic adjustment may not work for a

synchronization signal of C-SY or SYNC ON GREEN.

zzImages may be disrupted for a few seconds during automatic adjustment, but it is not a malfunction.

zzAdjustment is required for each input signal. zzAutomatic adjustment can be canceled by

pressing the <MENU> button during the automatic adjustment operation.

zzEven for an RGB signal for which automatic setup is possible, if automatic setup is performed while moving images are being input, the adjustment may not be performed properly. Even if [INCOMPLETE] or [COMPLETE] appears, the adjustment may not be performed properly.

Using the Function button

[DISABLE], [P IN P], [SUB MEMORY], [SYSTEM SELECTOR], [SYSTEM DAYLIGHT VIEW], [FREEZE],

[WAVEFORM MONITOR], [LENS MEMORY LOAD], or [LEFT/RIGHT SWAP] operations can be assigned to the <FUNC> button on the remote control so that it can be used as an easy shortcut button.

button

Press the <FUNC> button on the remote control.

Note

zz[LEFT/RIGHT SWAP] can only be assigned in PT-DZ21KE, PT-DS20KE.

zzAssignment of the function is performed from the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] ( page 110).

Basic Operation

ENGLISH - 59