Chapter 4 Settings — [NETWORK] menu

[Authentication set up] page

Set the authentication items when POP authentication or SMTP authentication is necessary to send an E-mail.

Click [Detailed set up] → [Authentication set up].

1[Auth]

Selects the authentication method specified by your Internet service provider.

2[SMTP Auth]

Set when the SMTP authentication is selected.

3[POP Server name]

Enter the POP server name. Allowed characters: Alphanumerics (A - Z, a - z, 0 - 9) Minus sign (-) and period (.)

4[User name]

Enter the user name for the POP server or the SMTP server.

1

2

3

4

5

6 7 8

5[Password]

Enter the password for the POP server or the SMTP server.

6[SMTP server port]

Enter the port number of the SMTP server. (Normally 25)

7[POP server port]

Enter the port number of the POP server. (Normally 110)

8[Submit]

Updates the settings.

[ECO management set up] page

Settings related to the ECO management function of the projector can be made. Click [Detailed set up] → [ECO management set up].

1[LAMP POWER]

Selects the [LAMP POWER] setting.

2[AUTO POWER SAVE]

Set to [ON] when setting [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION] and [SHUTTER DETECTION] *1

3[AMBIENT LIGHT DETECTION]

Selects enable ([ON])/disable ([OFF]) of the environmental luminance interlock function.

4[SIGNAL DETECTION]

Selects enable ([ON])/disable ([OFF]) of the no signal interlock function.

*1 For PT-EZ580, PT-EW640 and PT-EX610

[AV MUTE DETECTION] for PT-EW540 and PT-EX510

Note

5[SHUTTER DETECTION] *1

Selects enable ([ON])/disable ([OFF]) of the shutter interlock function.

6[NO SIGNAL SHUT-OFF]

When the No signal shut-off function is used, select the time until the standby mode is entered.

7[Submit]

Updates the settings.

ff For details of each setting item, refer to the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] (x page 87) on the projector.

ENGLISH - 119