Chapter 3 Basic Operations — Operating with the remote control

Operating with the remote control

For PT-EZ580, PT-EW640

For PT-EW540

and PT-EX610

and PT-EX510

Switching the input

The input for projection can be switched.

button

1)Press the input selection (<RGB1/2>, <DIGITAL LINK>, <DVI-D>, <VIDEO>, <DisplayPort>, <HDMI>)

buttons.

ff This operation can be also performed using the <INPUT> button on the control panel.

<RGB1/2>

Switches the input to RGB1 or RGB2. Switches to another input when one input has already been

chosen.

 

<DIGITAL LINK> *1

Switches the input to DIGITAL LINK.

<DVI-D>

Switches the input to DVI‑D.

<VIDEO>

Switches the input to VIDEO.

<DisplayPort>*1

Switches the input to DisplayPort.

<HDMI>

Switches the input to HDMI.

*1 Only for PT-EZ580, PT-EW640 and PT-EX610

Note

ff When the optional Digital Interface Box (Model No.: ET‑YFB100G) is connected to the <DIGITAL LINK/LAN> terminal, the ET‑YFB100G input changes with each press of the <DIGITAL LINK> button. The input can also be changed using the control command of RS‑232C. For twisted-pair-cable transmitters of other manufacturers, switch the input on the projector to DIGITAL LINK, and then switch the input on the twisted-pair-cable transmitter.

Using the SHUTTER/AV MUTE button

If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the image and audio temporarily.

*<SHUTTER> button

(Only for PT‑EZ580, PT‑EW640 and PT‑EX610)

button

1)Press the <SHUTTER> button.

ff The image and audio disappear.

ff This operation can be also performed using the <SHUTTER> button on the control panel.

ENGLISH - 51