Chapter 3 Basic
Note
ff The above initial setting screen is the one displayed when the projector is switched on for the first time after purchase. When [ALL USER DATA] in the [PROJECTOR SETUP] menu → [INITIALIZE] is executed, the setting of [STANDBY MODE] before execution is displayed.
Initial setting (screen setting)
Set the screen format (aspect ratio) and display position of the image. After completed the initial setting, you can change the settings of each item from the [DISPLAY OPTION] menu → [SCREEN SETTING].
1)Press as to select an item.
2)Press qw to switch the setting.
| INITIAL SETTING | 4/4 |
|
|
|
|
|
| SCREEN FORMAT | 16:10 |
|
SCREEN POSITION
Set as necessary for the screen in use.
MENU SELECT | CHANGE |
ENTER SET
3)Press the <ENTER> button.
ff Confirm the setting value and complete the initial setting.
Note
ff If you press the <MENU> button while the initial setting screen is displayed, you can go back to the previous screen.
ff By default, the time zone of the projector is set to +09:00 (Japan and Korean Standard Time). Change the setting in the [PROJECTOR SETUP] menu → [DATE AND TIME] → [TIME ZONE] to the time zone of the region where you use the projector.
Making adjustments and selections
It is recommended that images be projected continuously for at least 30 minutes before the focus is adjusted.
2)3)
1) 8) | 5) |
| 7) 9) |
2) | 6) |
| |
| 3) |
4) | 4) |
1)Press the <FOCUS> button to roughly adjust the focus of the image. (x page 49)
2)Change the setting of [PROJECTOR SETUP] menu → [PROJECTION METHOD] depending on the installation mode. (x page 30)
ff Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen.
3)Press the <INPUT> button on the control panel or the input selection (<RGB1/2>, <DIGITAL LINK> *1,
(*1 Only for
4)Adjust the front, back and sideway tilt of the projector with the adjustable feet. (x page 37)
5)Press the <SHIFT> button to adjust the position of the image.
ENGLISH - 47