|
| Chapter | |
|
|
|
|
| [OFF] |
| Standard setting |
| [USER] |
| For each of the following four signal formats: VIDEO, Y/C, RGB, and YPBPR/YCBCR, six colors of red, |
|
| green, blue, cyan, magenta, and yellow can be adjusted and registered. Press the <ENTER> button | |
|
|
| to set the details. Adjustment is possible within the range of |
[SCREEN SETTING]
Set the screen size.
Correct to the optimum image position for the set screen when changing the aspect ratio of a projected image. Set as necessary for the screen in use.
1)Press as to select [SCREEN SETTING].
2)Press the <ENTER> button.
ff The [SCREEN SETTING] screen is displayed.
3)Press qw to switch the [SCREEN FORMAT] item.
ff The items will switch each time you press the button.
Model No. | [SCREEN FORMAT] | Range when [SCREEN POSITION] is selected | |
| [16:10] | Cannot be adjusted. | |
PT‑EZ580 | [4:3] | Adjusts the horizontal position between ‑160 and 160. | |
| [16:9] | Adjusts the vertical position between ‑60 and 60. | |
PT‑EW640, PT‑EW540 | [16:10] | Cannot be adjusted. | |
[16:9] | Adjusts the vertical position between ‑40 and 40. | ||
| |||
PT‑EX610, PT‑EX510 | [4:3] | Cannot be adjusted. | |
[16:9] | Adjusts the vertical position between ‑96 and 96. | ||
|
4)Press as to select [SCREEN POSITION].
ff If [SCREEN FORMAT] is set to [16:10] on PT‑EZ580, PT‑EW640, PT‑EW540, or [SCREEN FORMAT] is set to [4:3] on PT‑EX610, PT‑EX510, then selection and adjustment of [SCREEN POSITION] are not available.
5)Press qw to adjust [SCREEN POSITION].
[AUTO SIGNAL]
Set whether to execute automatic setup of signals automatically.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP> button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.
1)Press as to select [AUTO SIGNAL].
2)Press qw to switch the item.
ff The items will switch each time you press the button.
[OFF] | Sets the auto signal function to off. | |
[ON] | Executes automatic setup automatically when images are changed to unregistered signals during | |
projection. | ||
|
[AUTO SETUP]
Set this when adjusting a special signal or horizontally long (such as 16:9) signal.
Setting with [MODE]
1)Press as to select [AUTO SETUP].
2)Press the <ENTER> button.
ff The [AUTO SETUP] screen is displayed.
3)Press as to select [MODE].
4)Press qw to switch the item.
ff The items will switch each time you press the button.
[DEFAULT] | Standard setting. |
76 - ENGLISH