Chapter 3 Basic Operations — Operating with the remote control

Using the P IN P function

Locate a separate, small sub screen in the main screen to project two images simultaneously.

button

1)Press the <P IN P> button.

ff The setting will change each time you press the button.

Note

ff Refer to the menu [P IN P] menu (x page 98) for details.

Using the function button

[SUB MEMORY], [SYSTEM SELECTOR], [DAYLIGHT VIEW], or [TEST PATTERN] operations can be assigned to the <FUNCTION> button on the remote control so that it can be used as an easy shortcut button.

button

1)Press the <FUNCTION> button.

Note

ff Assignment of the function is performed from the [PROJECTOR SETUP] menu → [FUNCTION BUTTON] (x page 92).

Using the status function

You can display the status of the projector.

button

1)Press the <STATUS> button.

ff The [STATUS] screen is displayed.

STATUS

 

1/4

INPUT

 

RGB2

SIGNAL NAME

 

SXGA60+-A1

SIGNAL FREQUENCY

65.22kHz/ 59.99Hz

PROJECTOR RUNTIME

 

1h

LAMP: ECO

 

100h

: NORMAL

 

200h

: TOTAL

 

300h

INTAKE AIR TEMP.

 

27°C/ 80°F

AROUND LAMP TEMP.

 

27°C/ 80°F

ENTER SEND STATUS VIA E-MAIL

EXIT

CHANGE

MENU

 

 

 

Note

ff This can be displayed from the [PROJECTOR SETUP] menu → [STATUS] (x page 94).

Using the ECO management function

You can display the setting screen relating to ECO management.

button

1)Press the <ECO> button on the remote control.

Note

ff Refer to the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] (x page 87) for details.

ENGLISH - 55