Chapter 4 Settings — [PICTURE] menu

[PICTURE] menu

On the menu screen, select [PICTURE] from the main menu, and select an item from the sub- menu.

Refer to “Navigating through the menu” (x page 57) for the operation of the menu screen. ff After selecting the item, press asqw to adjust.

[PICTURE MODE]

You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.

1)Press as to select [PICTURE MODE].

2)Press qw or the <ENTER> button.

ff The [PICTURE MODE] individual adjustment screen is displayed.

3)Press qw to switch the item.

ff The items will switch each time you press the button.

[STANDARD]

The image becomes suitable for moving images in general.

[DYNAMIC]

The light output is maximized for use in bright areas.

[DICOM SIM.]

The image becomes similar to that of DICOM Part 14 Grayscale Standard.

[CINEMA]*1

The image becomes suitable for movie contents.

[NATURAL]*2

The image is sRGB compliant.

*1 Only for movie-based input signals

*2 Only for still image input signals

Note

ff When [PICTURE MODE] is set to [DICOM SIM.], [LAMP POWER] (x page 87) is fixed to [NORMAL].

ff DICOM is an abbreviation of “Digital Imaging and COmmunication in Medicine” and is a standard for medical imaging devices. Although the DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.

[CONTRAST]

You can adjust the contrast of the colors.

1)Press as to select [CONTRAST].

2)Press qw or the <ENTER> button.

ff The [CONTRAST] individual adjustment screen is displayed.

3)Press qw to adjust the level.

Operation

Adjustment

Range of adjustment

Press the w button.

The screen becomes brighter.

-31 - +31

Press the q button.

The screen becomes darker.

 

Attention

ff Adjust [BRIGHTNESS] first when you need to adjust the black level.

62 - ENGLISH