Chapter 4 Settings — [PROJECTOR SETUP] menu

[NUMBER OF REGISTERED

Displays the number of registered signals.

SIGNAL]

 

 

[REMOTE2 STATUS]

Displays the control status of the REMOTE2.

 

[MEMORY NO.]

Displays the memory number of the input signal.

 

[INPUT]

Displays the input terminal currently selected.

 

[SIGNAL NAME]

Displays the input signal name.

 

[SIGNAL FREQUENCY]

Displays the frequency of the input signal.

 

[SYNC.STATE]

Displays the synch polarity of the input signal.

 

[V.SYNC WIDTH]

Displays the vertical sync signal pulse width of the input signal.

[SIGNAL INFORMATION]

[SCAN TYPE]

Displays the scan type of the input signal.

 

[TOTAL DOTS]

Displays the total dot count of the input signal.

 

[DISPLAY DOTS]

Displays the number of input signal display dots.

 

[TOTAL LINES]

Displays the total line count of the input signal.

 

[DISPLAY LINES]

Displays the number of input signal display lines.

 

[SAMPLING]

Displays the sampling information of the input signal.

 

[SIGNAL LEVEL]

Displays the signal level of the input signal.

*1 The lamp runtime displayed is calculated internally by the following conversions.

 

 

Formula for lamp replacement time (rough estimate)

 

Lamp runtime displayed in

(A x 9 + B x 8) ÷ 9

 

ff A: Runtime when [LAMP POWER] is set to [AUTO] and [NORMAL]

 

[LAMP : TOTAL]

 

ff B: Runtime when [LAMP POWER] is set to [ECO]

 

 

 

 

 

*2 Only for PT-EZ580, PT-EW640 and PT-EX610

Note

ff The content of status can be sent via E-mail by pressing the <ENTER> button while displaying the [STATUS] screen.

ff Some items in [SIGNAL INFORMATION] may be displayed and others not displayed, depending on the signal being input.

[DATE AND TIME]

Set the time zone, date, and time of the built-in clock of the projector.

Setting the time zone

1)Press as to select [DATE AND TIME].

2)Press the <ENTER> button.

ff The [DATE AND TIME] screen is displayed.

3)Press as to select [TIME ZONE].

4)Press qw to switch [TIME ZONE].

Setting the date and time manually

1)Press as to select [DATE AND TIME].

2)Press the <ENTER> button.

ff The [DATE AND TIME] screen is displayed.

3)Press as to select [ADJUST CLOCK].

4)Press the <ENTER> button.

ff The [ADJUST CLOCK] screen is displayed.

5)Press as to select an item, and press qw to set the local date and time.

6)Press as to select [APPLY], and press the <ENTER> button.

ff The setting of the date and time will be completed.

Setting the date and time automatically

1)Press as to select [DATE AND TIME].

ENGLISH - 95