Chapter 3 Basic Operations — Operating with the remote control

2)Press the <SHUTTER> button again.

ff The image and audio reappear.

*<AV MUTE> button

(Only for PT‑EW540 and PT‑EX510)

button

1)Press the <AV MUTE> button.

ff The image and audio disappear.

ff This operation can be also performed using the <AV MUTE> button on the control panel.

2)Press the <AV MUTE> button again.

ff The image and audio reappear.

Attention

ff When the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [SHUTTER DETECTION] or [AV MUTE DETECTION] is set to [ON], do not switch on /off in a short time.

Note

ff The power indicator <ON (G)/STANDBY (R)> will flash slowly in green while the shutter function or AV mute function is in use.

Using the mute function

Audio can be temporarily turned off.

button

1)Press the <MUTE> button.

ff The audio disappears.

2)Press the <MUTE> button again.

ff The audio reappears.

Adjusting the volume

The volume of the built-in speaker or audio output can be adjusted.

button

1)Press the <VOL-> button/<VOL+> button on the remote control.

ff This operation can be also performed using the <VOL-> button/<VOL+> button on the control panel.

<VOL+>

Increases the volume.

<VOL->

Decreases the volume.

Using the freeze function

The projected image can be paused and audio turned off regardless of the playback of the external device.

button

1)Press the <FREEZE> button.

ff The image freezes and audio disappears.

2)Press the <FREEZE> button again.

ff Freezing of the image is canceled and audio reappears.

52 - ENGLISH