Chapter 4 Settings — [PROJECTOR SETUP] menu

Adjusting the left to right audio balance

1)Press as to select [AUDIO SETTING].

2)Press the <ENTER> button.

ff The [AUDIO SETTING] screen is displayed.

3)Press as to select [BALANCE].

4)Press qw to adjust the level.

Operation

Adjustment

Range of adjustment

Press w.

Increases the volume on the right.

L16 - R16

Press q.

Increases the volume on the left.

 

Setting audio output of the built-in speaker

1)Press as to select [AUDIO SETTING].

2)Press the <ENTER> button.

ff The [AUDIO SETTING] screen is displayed.

3)Press as to select [BUILT-IN SP].

4)Press qw to switch the item.

ff The items will switch each time you press the button.

[ON]

Audio is output from the built-in speaker.

[OFF]

Audio is not output from the built-in speaker.

Note

ff Audio is output from the built-in speaker even if the cable is connected to the <VARIABLE AUDIO OUT> terminal. To output audio from external audio devices connected to the <VARIABLE AUDIO OUT> terminal and not from the built-in speaker, set [BUILT-IN SP] to [OFF].

Setting audio output in the standby mode

1)Press as to select [AUDIO SETTING].

2)Press the <ENTER> button.

ff The [AUDIO SETTING] screen is displayed.

3)Press as to select [IN STANDBY MODE].

4)Press qw to switch the item.

ff The items will switch each time you press the button.

[OFF]

Audio is not output during standby.

[ON]

Audio is output during standby.

Note

ff When [STANDBY MODE] (x page 88) in [PROJECTOR SETUP] menu → [ECO MANAGEMENT] is set to [ECO], audio cannot be output during standby.

Setting to mute mode

1)Press as to select [AUDIO SETTING].

2)Press the <ENTER> button.

ff The [AUDIO SETTING] screen is displayed.

3)Press as to select [MUTE].

4)Press qw to switch the item.

ff The items will switch each time you press the button.

ENGLISH - 93