Advice on the installation of exhaust guides
Hot air from the cooling fan vents may in rare cases cause disturbances to the screen image. If this should occur, install the attached exhaust guides.
Fixing pin (2 sets)
1. Identify the
2. Insert the fixing pins from the bottom of the projector and tighten them securely.
Using the Freeze function
The picture freezes each time you press the remote control “FREEZE” button.
Still image
(FREEZE)
Motion image
Using the Shutter function
The shutter function can be used to momentarily turn off the picture and sound from the projector when the projector is not being used for short periods of time, such as during breaks in meetings or when carring out preparation. The projector uses less power in shutter mode than it does in normal projection mode.
1. Press the remote control/ “SHUTTER” button to mute both picture and sound.
Both video and audio are turned off.
2. To clear muting, press any button on the remote control or projector.
Apear the picture and sound.
25