Panasonic PT-L6510U manual Projector Top · Front and Side

Models: PT-L6510U

1 60
Download 60 pages 38.45 Kb
Page 11
Image 11
Projector < Top · Front and Side >

Projector < Top · Front and Side >

Status LED lights

Exhaust vents

Exhaust vents

 

Status LED lights

Side interface panel

(Viewed from the rear side)

(see page 13)

 

 

 

Manual backgroundSTAND BY (R) LAMP1 LAMP2 TEMP

ON (G)

Manual background Speakers

Speakers deliver a total audio output power of 6 watts (3 + 3 watts each).

Manual background Line input (AC IN) socket (page 23)

Connect the accessory line power cord into this receptacle. Do not connect any other cord to this socket.

Manual background MAIN POWER switch (page 23)

Use this switch to turn “ I ” “O” the commercial line power applied to the projector.

Manual background Burglar lock

Attach a commercial burglar prevention cable (e.g. from Kensington) to this lock port. It is compatible with the Micro Saver Security System from Kensington. This security lock is compatible with the Microsaver Security System from Kensington. Contact details for this company are given below. Kensington Technology Group ACCO Brands Inc.

2885 Campus Drive San Mateo, CA 94403 Tel (650)572-2700

Fax (650)572-9675 http://www.kensington.com/ http://www.gravis.com/

Manual background Air filter (page 41)

Manual background Leveling button (page 24)

Use these buttons (one on each side) to level the projector when resting on its feet.

Manual background Leveling foot (page 24)

Use in conjunction with Manual background for the projector's tilt adjustment.

(A leveling foot is provided on each side of the unit.)

Manual background Remote control receiver window (page 14)

Receives IR commands transmitted from the remote control.

Manual background Focus ring (page 23)

For focus adjustment.

Powered focus adjustment is also available.

Manual background Projection lens

Images are projected onto the screen through this lens.

Manual background Lens cap

Cap the lens whenever the projector is left unused.

Manual background Power status light (page 23)

Lit in red when the projector is in standby mode with MAIN POWER switch set to “ I ”. Lit in green when the unit is turned ON.

Manual background Lamp 1 monitor (page 40)

Lights when lamp unit 1 requires replacement. Flashes if the lamp 1 drive circuit is malfunctioning.

Manual background Lamp 2 monitor (page 40)

Lights when lamp unit 2 requires replacement. Flashes if the lamp 2 drive circuit is malfunctioning.

Manual background Temperature (TEMP) monitor light (page 40)

Warns of unacceptable internal temperatures. May be either continuously lit or flashing.

11

Page 11
Image 11
Panasonic PT-L6510U manual Projector Top · Front and Side