Panasonic PT-L6510U manual Example of connecting with PCs, PC with DVI port Control PC USB port

Example of connecting with PCs

PC with
DVI port	PC with	PC	Control PC
	USB port

DVI Cable (Option)

(ET-SCDV03)

USB cable (Accessory)

IN			OUT	L	R	IN	OUT	IN	IN	OUT
S-VIDEO IN	VIDEO			AUDIO IN		RGB	AUDIO	USB	SERIAL		IN
						AUDIO
R/R-Y/PR	G/Y		B/B-Y/PB		SYNC/HD	VD					OUT
			RGB 1 IN					RGB 2 IN	RGB OUT	REMOTE	WIRED
		IN	DVI-D			OUT				> PC <	TBMU152
								* 1

IN			OUT	L	R	IN	OUT	IN	IN	OUT
S-VIDEO IN	VIDEO			AUDIO IN		RGB	AUDIO	USB	SERIAL		IN
						AUDIO
R/R-Y/PR	G/Y		B/B-Y/PB		SYNC/HD	VD					OUT
			RGB 1 IN					RGB 2 IN	RGB OUT	REMOTE	WIRED
		IN	DVI-D			OUT				> PC <	TBMU152

Color monitor with

RGB video ports

Caution

•When the projector's main power is turned OFF, also turn OFF all the PCs connected to it.

•*1 An asterisk denotes that the second projector requires positioning if the RGB outputs are connected in a daisy chain. However, the signals should be divided at the signal source if possible.

Note

•If your PC is not equipped with a USB port, a ET-RMRC1 interface will be needed to use the mouse capability of the remote control.

•For the specifications of the RGB signals that can be applied from the PC, see the data sheet on page 48.

•If your PC has the resume feature, the computer may not function properly until the resume capability is disabled.

•Signals applied to the RGB1 or RGB2 ports appear at the RGB OUT port.

21