Panasonic PT-L6510U Replacing the lamp unit, Lamp replacement period, Model No Lamp unit model No

Replacing the lamp unit

Caution!

Replacement of the lamp unit should only be carried out by a qualified technician.

Notes when replacing the lamp unit:

Caution!

Replace the lamp unit only after it has completely cooled off.

•The internal pressure of the light source is high, therefore if it is struck by hard objects or dropped, it may cause damage. Be careful when handling.

•Handle the old lamp unit with care as it is easily broken.

•A Philips screwdriver is necessary when replacing the lamp unit. Be careful not to slip when using the screwdriver.

Caution

•The lamp unit is sold separately. Please consult the service/parts center at your dealer.

Model No.	Lamp unit model No.
PT-L6510U	ET-LAL6510 (1 lamp) • ET-LAL6510W (2 lamps)
PT-L6600U

•Lamps other than those indicated above must not be used with this projector. Be sure to use the specified lamp.

Lamp replacement period

The light source lamp of this projector has a life cycle of 2000 hours (Lamp power---hi, Lamp selection---dual setting). However, this duration may be reduced depending on the usage of the projector-the frequency in which the light is turned on and of its intervals affect the life of the lamp. Therefore it is recommended that a spare lamp be made available before 2000 hours have elapsed. If the lamp unit is not replaced after 1800 hours, the power will automatically shut off after 2000 hours and enter standby mode. If the power is turned on after 2000 hours, it will turn off automatically after approximately 10 minutes and enter standby mode.

Note

•2000 hours is a guideline for replacement, not a guarantee time.

•Display after 1800 hours

The lamp monitor indicators (LAMP 1 or LAMP2) will light after the lamp unit runtime has elapsed 1800 hours even during standby mode.

An on - screen message indicating lamp replacement is necessary will be displayed on the screen 30 seconds.

(This on-screen message will disappear after 30 seconds or the projector operation buttons remote control buttons are operated.)

This on-screen message does not disappear, unless a “MENU” buttons or sound adjustment

(“VOLUME +/-”) buttons will be pushed, if it reaches in 2000 hours.

	S-VIDEO
REPLACE LAMP	AUTO

42