Location and function of each part
Remote Control
Remote control operating indicator lamp
The light flashes when any remote control button other than the “LASER” button is pressed.
POWER button (page 23)
Turns the projector ON/OFF when the MAIN POWER switch on the projector is set to “ I ”.
AUTO SETUP button (page 23)
Pressing this button automatically corrects picture positioning on the screen. While the auto setup feature is active, the message “AUTO SETUP” appears on the screen.
RGB button (page 23)
Use to toggle through the RGB1, RGB2, and
LASER button (page 15)
While this button is pressed and held, the remote control activates its laser transmitter to display a laser pointer on the screen.
VIDEO button (pages 16 and 23)
Use to toggle between the Composite Video and S- Video ports. The button acts as the Page Down button if the Mode switch 
is set to the Computer position.
MENU button (pages 16, 27 and 28)
Main Menu display is switched on and off alternately each time this button is pressed. If the menu has multiple pages, this button may be used to view the next or previous menu page. The button acts as the
Page Up button if the Mode switch 
is set to the Computer position.
Arrow ( 
) buttons (pages 16 and 28)
Use to choose menu items, change settings, or adjust control parameters. The button acts as a mouse, so can move the cursor if the Mode switch 
is set to the Computer position.
ENTER button (pages 16 and 28)
Press this button to enter your menu selection or to run functions. The button acts as the right mouse button if the Mode switch 
is set to the Computer position.
FREEZE button (page 25)
Press this button to temporarily freeze the image presently on the screen.
SHUTTER button (page 25)
Press this button to temporarily mute/black out both audio and video.
D.ZOOM
Any portion of the picture can be enlarged.
VOLUME
Use these buttons to adjust the volume level from the internal speakers or line levels on the AUDIO OUT lines.
FUNC1 button (page 35)
Use to select from the functions listed on the “OPTION2” screen that can be chosen from the MAIN MENU.
ID SET button (page 15)
Use to set the projector ID when multiple
Mode switch (Computer/Projector) (page 16)
When controlling the projector, set this switch to the Projector (right) side. When controlling your PC, set it to the Computer (left) side.
Wired Remote Control port (page 17)
When using wired remote control, connect the remote control to the projector with the accessory wired remote control cable.
Remote Control Transmitter Window
Whenever operating the Remote Control, aim this window to the projector's remote control receiver window.
Laser Transmitter Window
Click button (page 16)
The button acts as the left mouse button if the Mode switch 
is set to the Computer position.
10
