Panasonic PV-VM202 Digital Zoom Function, Digital Electronic Image Stabilizer Function

W.B./SHUTTER/IRIS/	1
2 MF/VOL/JOG 1

PUSH

1

2

W

3

4

T

20t W T

D.ZOOM

EIS 1

W.B./SHUTTER/IRIS/

MF/VOL/JOG

2 1

PUSH

1

1 2

1, 3

2

Digital Zoom Function

This function is useful when you want to record close-up shots of subjects located beyond a normal zoom range of 1k to 10k magnification. With the Digital Zoom Function, you can select a magnification of 25k or 200k.

1Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [D.ZOOM] >> [25t] or [200t]

≥25k: Digital zooming to 25k

≥200k: Digital zooming to 200k

2To zoom in or out, press the [W/T] zoom lever towards [T] or

towards [W].

≥As the magnification of digital zooming increases, the quality of image may deteriorate.

Canceling the Digital Zoom Function

Set [D.ZOOM] on the [CAMERA SETUP] Sub-menu to [OFF].

≥For other notes, see page 60.

~~~~~~~~~~~~~~~~~~~~~~~~

Digital Electronic Image Stabilizer Function

If you are recording in unstable situations and the Palmcorder is shaky, you can use this function to correct for camera shake in these images.

≥If the Palmcorder shakes too much, this Function may not be able to stabilize images.

1Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [EIS] >> [ON].

≥The [EIS] Indication 1 appears.

Canceling Digital Electronic Image Stabilizer

Set [EIS] on the [CAMERA SETUP] Sub-Menu to [OFF].

EIS function may not work when...

≥Palmcorder movement is too extreme.

≥Recording a subject with distinct horizontal or vertical stripes. ≥Recording in low light situations.

≥Recording a subject under a great amount of fluorescent light. ≥Recording a scene with very fast movement.

≥For other notes, see page 60.

~~~~~~~~~~~~~~~~~~~~~~~~

Fade In/Out Functions

Fade In 1

Fade In brings out images and sounds gradually from a black screen at the beginning of a scene.

1Hold down the [FADE] Button while the Palmcorder is set to the Recording Pause Mode.

≥The image fades out gradually.

2When the image is completely gone, press the Recording Start/Stop Button to start recording.

3Release the [FADE] Button about 3 seconds after starting recording.

≥The image reappears gradually.

Fade Out 2

Fade Out causes images and sounds to disappear gradually, leaving a black screen at the end of a scene.

1Hold down the [FADE] Button while recording.

≥The image fades out gradually.

2About 3 seconds after the image is completely gone, press the recording Start/Stop Button to stop recording.

3Release the [FADE] Button.

≥Fade in/out function cannot be used in MPEG4 Recording Mode (l 38), PhotoShot Recording Mode, or Still Picture Mode (l 21).

≥For other notes, see page 60.

22