Panasonic PV-VM202 Using a Memory Card, Recording on the Memory Card, Inserting a Memory Card

6	ACCESS	5
		CARD EJECT

12

1 A

3

4

F 7 640

2

STILL MPEG4 VOICE

CARD

MODE

TAPE

1 CARD

W.B./SHUTTER/IRIS/

3, 4 MF/VOL/JOG

2 1

PUSH

3

BACKLIGHT

CAMERA

STILL

PHOTO

SHOT

5

Using a Memory Card

A Card can be used to record files or play back files.

≥Use genuine SD Memory Card or MultiMediaCard only.

ªInserting a Memory Card

Before inserting a Memory Card, be sure to turn off the Palmcorder.

1While holding the Memory Card with its cut off corner A facing right 1, insert it into the Card Slot 2.

≥The display of the Card Slot changes from 3 to 4.

Ejecting a Card

After turning the Palmcorder off, slide the [CARD EJECT] Lever 5 to the left.

ª[ACCESS] Lamp

While the Palmcorder is accessing the Card (reading, recording, playback, erasing, moving of images), the [ACCESS] Lamp 6 lights up.

≥While the [ACCESS] Lamp is on, never attempt to: pull out the Card, turn off the Palmcorder power, or switch the [TAPE/CARD] Selector. Such actions will damage the Card and cause the Palmcorder to malfunction.

~~~~~~~~~~~~~~~~~~~~~~~~~

Recording on the Memory Card

Three kinds of data can be recorded by selecting with the [STILL/MPEG4/VOICE] Selector. When recording still pictures, select [STILL] (Card PhotoShot), when recording moving pictures, select [MPEG4] (MPEG4 Recording), when recording voice, select [VOICE]

(Voice Recorder Function).

≥If the [TAPE/CARD] Selector is set to [CARD], the Palmcorder is

automatically turned off when you leave it for about 5 minutes without performing any PhotoShot recording.

≥When the [TAPE/CARD] Selector is set to [CARD], you cannot record to the Tape.

ªCard PhotoShot

Still pictures can be recorded on the Memory Card from the Palmcorder lens as well as from scenes that have already been recorded on a cassette.

The size of images that are recorded using this Palmcorder is approximately 1,080,000 pixels. Recording of images with a size that is larger than a million pixels is called mega-pixel still-picture recording. Compared to images of normal recording, images that are created by mega-pixel still-picture recording can be printed more clearly.

Recording from the Palmcorder Lens (Camera Mode)

1Slide the [TAPE/CARD] Selector to [CARD].

2Slide the [STILL/MPEG4/VOICE] Selector to [STILL].

3Set [CAMERA FUNCTIONS] >> [CARD SETUP] >> [PICTURE SIZE] >> [1200k900] or [640k480].

4Set the [PICTURE QUALITY] to desired picture quality.

5Press the [PHOTO SHOT] Button.

≥The [ PICTURE ] Indication will light in red.

≥Mega-pixel recording (when you select [1200t900] in step 3) is useful for taking clear pictures, but the following functions are disabled during mega- pixel recording.

≥Digital zooming (l22)

≥Digital Electronic Image stabilizer function (l22) ≥Digital Effect functions (l26, 27)

≥Title In/Creation (l42)

≥The power is automatically turned off after about 5 minutes when a card has been inserted.

35