Panasonic PV-VM202 Using the Supplied USB Connection Kit, Installing USB Driver

1

VFA0366

LSFT0489

1

Using the Supplied USB Connection Kit

ªOperating environment

USB Driver can be installed in a PC/AT compatible personal computer which can run Microsoft Windows® XP, Windows® Me, Windows® 98SE, Windows®2000 Professional.

≥USB Driver

For Windows®

≥IBM PC/AT or compatible

≥Intel Pentium ll Processor: 300 MHz or higher CPU recommended

≥Microsoft Windows® XP, Windows® Me, Windows® 98SE, Windows®2000

Professional pre-installed PC with USB port

≥Video card that supports16 bit color at 800k600 monitor resolution ≥RAM: 64 MB or more

≥2 MB minimum available hard disk space ≥Disk drive: CD-ROM drive

≥Ports: USB Terminal

≥Other requirements: Mouse or other pointing device

~~~~~~~~~~~~~~~~~~~~~~~~~

Installing USB Driver

4

In order for USB Driver to be installed, the hard disk must have at least 2 MB of free space. Before proceeding with installation, check out the amount of free space on the hard disk.

1Insert supplied CD-ROM into the CD-ROM drive.

≥[Setup Menu] 1 appears.

2Select the software to be installed from [Setup Menu].

≥The set up program starts running.

3Finish installation by following the on-screen instructions.

≥Carefully read the license agreement on the window, and if you agree click [Yes]. Software is not installed if [No] is clicked.

4Click [OK] when the [Restarting Windows] Dialog appears.

≥Reboot the computer to finish installing USB driver.

≥Installation continues after the computer reboots if you selected

additional software.

≥If you no longer need the driver, see page 55. ≥Update the driver after upgrading the OS.

~~~~~~~~~~~~~~~~~~~~~~~~~

Connecting Computer and Palmcorder

Install USB Driver (above) before connecting.

Before making these connections, turn off all devices which are to be connected.

1Install the supplied USB Driver. (above)

2Insert memory card into Palmcorder, then set card playback mode.

4)3 Use auxiliary USB Connection Cable to connect.

3)≥PC connecting mode.

1)2)

TO PC

1)Palmcorder

2)USB Connection Cable

3)USB terminal

4)Personal computer (not supplied)

≥After making the connections, turn the connected equipment on.

≥Appropriate driver to recognize Palmcorder is automatically installed by Windows Plug’n Play when connected first time.

≥When using the USB Connection Kit, use of the AC Adaptor is recommended to use as the power supply of the Palmcorder.

≥After the USB Driver is installed and USB Connection Cable is connected to the Palmcorder, open [My computer] or [Windows Explorer] to check the drive is displayed as a removable disk drive (only when card is inserted into the Palmcorder). It enables you to operate like a floppy disk drive, and you can use the same drag and drop or copy methods.

49