Panasonic PV-VM202 DV Camera Style and SD Camera Style, Attaching the Battery Adaptor Unit

1, pull the Camera Unit

	2	Special Features
		DV Camera Style and SD Camera Style
5	3	This is a Digital Video Camera which can be used in two ways depending on
		the situation.

One is the DV Camera Style 1 which combines the Camera Unit 2 and

Video Unit 3, and the other is the SD Camera Style 4 which combines the

Camera Unit 2 and the supplied Battery Adaptor Unit 5.

DV Camera Style

1≥Both Tape and Card can be used.

SD Camera Style

4≥It is easy to carry, because it’s small and lightweight. ≥Tape cannot be used.

1

CAMERA RELEASE

1

23

2 CAMERA RELEASE

3

2,OPEN13

2 1

~~~~~~~~~~~~~~~~~~~~~~~~

Attaching the Battery Adaptor Unit

Mounting the Battery Adaptor Unit allows the Palmcorder to be compact as well as light and portable.

≥Please carry out the Attachment/Removal of the Battery Adaptor Unit while the Palmcorder switch is off. Do not remove the Unit while the operation mode lamp is lit.

1While sliding the [CAMERA RELEASE] Lever 1, pull the Camera Unit straight out in the direction of the lens.

2Match the mark 2 and place the Camera Unit on the Battery Adaptor Unit.

3Slide the Camera Unit until it locks with a click.

Removing the Battery Adaptor Unit

While sliding the [CAMERA RELEASE] Lever straight out in the direction of the lens.

≥When the red portion 3 of the [CAMERA RELEASE] Lever shows or the Camera Unit is not completely installed, the Palmcorder cannot be powered on. The Camera Unit must be shifted to the end again and locked.

~~~~~~~~~~~~~~~~~~~~~~~~

Attaching the Battery

1Slide the [OPEN] Lever upwards to open the Battery Door 1.

2Insert the battery completely.

3Close the Battery Door.

Removing the Battery

Slide the [OPEN] Lever to open the Battery Door, and then slide the Battery Eject Lever 2. Finally slide the Battery to remove it.

≥For other notes, see page 62.

34