Panasonic PV-VM202 Attaching the Lens Cap, Adjusting the Grip Belt, Inserting a Cassette

12

34

1

1

2

Attaching the Lens Cap

To protect the Lens surface, attach the Lens Cap.

1Pass the loop of the Lens Cap Cord through the Lens Cap Installation Hole on the Palmcorder.

2Pass the opposite side of the Lens Cap Cord through the cord’s hoop.

3Pull the Lens Cap to the direction of the arrow.

4Attach the Lens Cap.

≥The removed Lens Cap can be hooked onto the Grip Belt 1. (When you are not recording, be sure to keep the Lens Cap attached to the Lens for protection.)

≥If the supplied Lens Hood for MEGA STILLTM Pictures Recording is attached, the Lens Cap cannot be attached.

~~~~~~~~~~~~~~~~~~~~~~~~~

Adjusting the Grip Belt

Adjust the length of the Grip Belt to the size of your hand.

1Pass your hand through the Grip Belt and adjust its length.

2Fold back the end of the Grip Belt to securely fasten the velcro tape closure.

≥The Grip Belt can also be adjusted in SD Camera Style.

2

1 1

OPEN/EJECT

3

4

2

R E C

SAVE

~~~~~~~~~~~~~~~~~~~~~~~~~

Inserting a Cassette

When power is supplied to the Palmcorder, the cassette can be taken out without turning the Palmcorder on.

1Slide the [OPEN/EJECT] Lever 1 to the right and pull down to open the Cassette Compartment.

2Insert a Cassette.

3Close the Cassette Compartment and lock the Cassette Compartment by pressing the [PUSH TO CLOSE] mark.

4Close the Lower Cassette Compartment Cover.

≥For other notes, see page 60.

ªAccidental Erasure Prevention

Opening the accidental erasure prevention slider 2 on the cassette (by sliding it in the [SAVE] arrow direction) prevents recording. To enable recording, close the accidental erasure protection slider (by sliding it in the [REC] arrow direction.)

13