Panasonic PV-VM202 operating instructions Using the Video Flash, To Stop the Transfer of Images

W.B./SHUTTER/IRIS/ 2 MF/VOL/JOG

2 1

PUSH

2

BACKLIGHT 1

CAMERASTILL 1

1;

TAPE%CARD

NOW WRITING

F 7 640

1	W.B./SHUTTER/IRIS/
		MF/VOL/JOG
	2	1

	PHOTO SHOT
PUSH	2

1

2

æ

£ß 1

F 7 640

ªAutomatically copying still pictures recorded on a

cassette

The Palmcorder copies images automatically, referring to Photo Index signals.

After setting the Palmcorder to the VCR Mode (l28).....

1Set the Palmcorder to Still Playback Mode just before the point where picture transfer is to commence.

2Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [RECORD TO CARD] >> [YES].

≥Search starts from the current Cassette position, and images with

Photo Index signals are recorded onto the Card sequentially. ≥While copying, the indication 1 appears.

To Stop the Transfer of Images

Press the [∫] Button.

≥For other notes, see page 62.

~~~~~~~~~~~~~~~~~~~~~~~~~

Using the Video Flash

Using the Video Flash of the Battery Adaptor Unit allows a PhotoShot in dark places.

Video Flash can be used in SD Camera Style only.

1Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >>

[FLASH] >> [ON].

≥The [ß] Indication appears. 1

≥Setting to [AUTO] allows the flash to fire when recording in a dark place.

2Press the [PHOTO SHOT] Button.

To reduce the “red eye” phenomenon in your pictures (Red Eye Reduction)

When setting the [RED EYE REDUCTION] in the [RECORDING SETUP] Sub-Menu to [ON], the [£] Indication 2 is displayed.

≥The available range of the Video Flash is approximately 1 to 2.5 metres in a dark place. Pictures will appear dark when they are recorded using the Video Flash at distances greater than 2.5 metres.

≥Continuous PhotoShot is not possible if the Video Flash is used.

≥When this Palmcorder is used in SD Camera Style, the Palmcorder will automatically detect the surrounding brightness and determine if the flash is necessary or not. (Regardless of setting [FLASH] to [OFF], the [ß] flashes when a source of light is necessary.)

37