2, 2, 2

STILL MPEG4 VOICE

CARD

MODE

3, 3, 3

TAPE 1, 1, 1 CARD

R: 0h20m

2

STILL MPEG4 VOICE

CARD

MODE

3

TAPE

1 CARD

R: 0h20m

ªRecording Moving Pictures (MPEG4)

You can record moving pictures for e-mailing on a Memory Card. The recorded data can be also played back on Windows Media Player.

Recording from the Palmcorder Lens (Camera Mode)

1Slide the [TAPE/CARD] Selector to [CARD].

2Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].

3Press the Recording Start/Stop Button.

It takes 2 to 3 seconds to start recording.

During recording, the [ MPEG4 ] Indication is lit in red.

The maximum continuous recording time is 60 minutes.

The Palmcorder will automatically stop recording when the relevant time listed above has elapsed.

When Remaining Time Indication becomes [R:0h00m],

[NO SPACE LEFT] Indication appears. Recording may not be started. The shutter speed is adjustable within the range of 1/60 to 1/500 while

recording moving pictures (MPEG4).

The picture size of the moving picture (MPEG4) is set to be [176k144]. When attaching to email, we recommend the picture size to be less than

1MB (about 1 minute length).

The following functions are disabled.

Digital Zoom (l22)

Cinema Function (l23)

Digital Effect Functions (l26) Title In/Creation (l42)

Fade In/Out Function (l22)

Recording from a Cassette (VCR Mode)

1Slide the [TAPE/CARD] Selector to [CARD].

2Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].

3Start playback and press the Recording Start/Stop Button at the desired scene.

Recording from other equipment

1Slide the [TAPE/CARD] Selector to [CARD].

2Slide the [STILL/MPEG4/VOICE] Selector to [MPEG4].

3Input the image from other equipment then press the

Recording Start/Stop Button at the desired scene.

Maximum recording time on the supplied Card (16 MB)

Approximately 15 minutes

The video resolution of the camera is reduced when making a MPEG4 recording. This is done in order to optimize the image quality in MPEG4 recordings, and does not reflect a problem with the software or hardware.

For other notes, see page 63.

ªRecording Voice (Voice Recording Function) You can record voice data on a card.

1 Slide the [TAPE/CARD] Selector to [CARD].

2 Slide the [STILL/MPEG4/VOICE] Selector to [VOICE].

3 Press the Recording Start/Stop Button.

Voice from built-in microphone is recorded.

It takes 2 to 3 seconds to start recording.

The recorded file is automatically locked (to prevent accidental erasure).

During recording, the [ VOICE ] Indication is lit in red.

If a card is not inserted, the Indication flashes in red. When Remaining Time Indication becomes [R:0h00m],

[NO SPACE LEFT] Indication appears. Recording may not be started.

For other notes, see page 63.

38

Page 38
Image 38
Panasonic PV-VM202 Recording Moving Pictures MPEG4, Maximum recording time on the supplied Card 16 MB