Panasonic PV-VM202 operating instructions Quick Guide, To View the Playback Picture

1

POWER CHARGE

QUICK 100%

1

2

CAMERA

OFF ON MODE

VCR

CARD P. B.

POWER

3 2

44

3

OPEN/EJECT

5

CAMERA

OFF ON MODE

VCR

CARD P. B.

POWER

Quick Guide

1Charge the Battery. (l12)

≥Connect the AC Cable to the AC Adaptor and plug it into Wall Outlet. ≥Attach the Battery to the AC Adaptor. (This will start the charging

process.)

≥After the [POWER] Lamp has lit up, the [CHARGE] Lamp flashes. When the [100%] Lamp 1 on the AC Adaptor is lit, charging is finished.

≥Since the Battery will not be charged when the DC Cable is connected to the AC Adaptor, disconnect it.

2Attach the Charged Battery to the Palmcorder. (l12)

3Turn the Palmcorder on. (l14)

≥Slide the 2 Switch to [ON]. (The [CAMERA] Lamp lights up.)

4Insert the Cassette. (l13)

≥Slide the [OPEN/EJECT] 3 lever to the right and pull down to open the Cassette compartment cover completely.

≥Insert the Cassette.

≥Press the [PUSH TO CLOSE] 4 to load the Cassette. ≥Close the lower compartment Cover.

5Start recording. (l20)

≥Press the 5 Button. (Recording starts.)

≥Press the 5 Button again to pause the recording.

6, 7

CAMERA

5

OFF ON MODE

To View the Playback Picture

6 Switch to the VCR Mode, rewind the tape, and play the tape

back. (l28)

≥Set the 6 Switch to VCR mode. (The [VCR] Lamp lights up.)

≥Press the 7 Button. (Rewind the tape.)

VCR

CARD P. B.

POWER

6

BACKLIGHT 8

CAMERA

STILL

9

7

≥Press the 8 Button. (Playback starts.)

≥Press the 9 Button. (Playback stops.)

7 Turn the Palmcorder off. (l14)

≥Set the 6 Switch to [OFF].

7