Attaching to a tripod, Strap fixture | Panasonic SDR-S10P guide

Before using

Strap fixture

We recommend using the 2-way hand strap (supplied) to prevent the unit from dropping.

Attach the 2-way hand strap 1 to this unit.

1

∫To use as a grip belt.

1Attach the tripod adaptor 2 to the attachment screw for tripod adaptor on this unit.

2

2Pass your hand between the strap and the unit and then pull the length adjustment tab

3.

3

Attaching to a tripod

To use a tripod (optional), the tripod adaptor on the 2-way hand strap (supplied) must be attached to this unit. (Please carefully read the operating instructions for how to attach the unit to the tripod.)

1Attach the 2-way hand strap and the tripod adaptor to the unit.

2Attach camera base 2 on the tripod to the tripod receptacle 1 on the adaptor.

1

2

To detach from the tripod

When detaching from the tripod, only the unit may detach and the adaptor may not detach. In this case, use the length adjustment tab to turn the adaptor and detach it from the tripod.

≥When the tripod is used, the card/battery door cannot be opened. Insert an SD card and the battery before attaching this unit to the tripod. (l 24, 31)

19

VQT1D97

Image 19

Panasonic SDR-S10P Attaching to a tripod, Strap fixture, To use as a grip belt, Attach the 2-way hand strap 1 to this unit

Contents

Model No.SDR-S10P/PC Thank you for choosing Panasonic Things You Should Know Following Applies only in Canada Following Applies only in the U.S.A Important Safety Instructions Care Indemnity concerning recording contentUSE & Location ≥ do not AIM Your Camera AT the SUN or Other Bright Objects AC adaptor BatteryBattery pack Lithium ion battery pack Carefully observe copyright laws A./CANADA Consumers Attention For the purposes of these operating instructions Contents Request for Service Notice USA Only TroubleshootingSpecifications Optional accessories Before using To insert/remove the batteryQuick Guide Inserting/removing the SD card Charging the batteryHow to turn on the power How to turn off the power Recording still pictures Recording motion picturesPress the record button Still picture playback Motion picture playback Water resistance Features Shock proof Parts identification and handling AccessoriesCD-ROM VQT1D97 Open them where water or sand About the Card/battery door and the Terminal cover Attach the 2-way hand strap 1 to this unit Attaching to a tripodStrap fixture To use as a grip belt Adjust the angle of the LCD monitor as desired Using the LCD monitor Recording SD cardConcerning the cards that can be used on this unit Capacity About SD cards that you can use for motion picture recording SD Speed Class Rating Class Handling precautions Setup Power supplyInserting the battery and charging the battery ¬ Rotate the mode dial to select OFF About charging errors To remove the battery Connecting to the AC outletSetup When the status indicator is off Charging time Charging time and recordable timeRecordable time Set the mode dial to OFF Selecting a modeSelecting a mode Turning the unit on/off Set the mode dial to , , or Quick start How to turn the power on and off with the LCD monitorTo turn on the power To turn off the power To cancel Quick start Close the LCD monitor while the mode dial is set to orOpen the LCD monitor Insert/remove the SD card into/from the card slot Inserting/removing an SD card Down Left Right Press to select the item How to use the cursor buttonCard access lamp Basic operations Press the cursor button up, down, left or right to operate Operations during recordingOperations during playback Press the cursor button up, left or right to select an item Video recording mode About the operation icons displayed in each mode Setup Video playback mode Picture playback mode Setup Picture recording mode To exit the help mode Help modePress the cursor button right to select Using the menu screen Switching the languageWhile stopped, press the Menu button To exit the menu screen To get back to the previous screen OFF Setting date and timeChanging the date and time display style DATED/T Brightness Adjusting the LCD monitorAdjusting the brightness and color level Changing the display style To cancel Power LCD Basic camera positioning Before recording About auto mode To end the recording Recording motion pictures Recording mode Remaining time left for recording Screen indications in the video recording modeRecording time elapsed 256 MB ≥ Recordable time using the battery l512 MB Recording still pictures Rotate the mode dial to select Press the record buttonTo record still pictures clearly Size of still pictures Remaining number of still pictures Screen indications in picture recording modePicture quality for still picture recording Recording with a shutter operation effect Zoom in/out function ¬ Rotate the mode dial to select Press the zoom buttonDigital zoom function To return to normal recording Backlight compensation functionTo use the zoom microphone function Press the cursor button up to select ª To select the color for fade in/out To cancel fadingFade in/fade out function Press the cursor button left to select Press the cursor button up to select Soft skin modeTo cancel the MagicPix function MagicPix function Press the cursor button left to select Ø Self-timer recordingTo cancel the soft skin mode To stop the timer midway through Recording images with a 169 aspect ratio Wide modeTo cancel the Recording guideline function Recording guideline function Image stabilizer function To cancel the image stabilizer function To cancel the wind noise reduction function Scene modeWind noise reduction function To cancel the scene mode function To restore to the automatic adjustment Manual focus adjustment White balance Outdoor modeUnder incandescent lamps About the white balance sensor a To set the white balance manuallySelect and then fill the screen with a white subject Aperture Manual shutter speed/ aperture adjustmentTo restore to automatic adjustment Shutter Speed Manual iris/gain adjustment Manual shutter speed adjustment Press the cursor button in the center Rotate the mode dial to selectMotion picture playback Select the scene to be played back Fast forward/rewind playback About motion picture compatibilitySlow-motion playback Frame-by-frame playback To adjust the volumePlaying back motion pictures by date Resuming the previous playback Select the file to be played back Still picture playback About still picture compatibility Deleting multiple scenes from the thumbnail display EditingDeleting scenes Deleting scenes one at a time To stop halfway through the deletion To continue deleting other scenesTo complete editing Locking scenes To complete the settings What is DPOF? Dpof settingTo cancel all Dpof settings Formatting an SD card Card management With other products With a TVPlayback on TV Start playback on this unit To display the on-screen information on the TV screen To watch images with a 169 aspect ratio on a regular TV Copying dubbing recordings onto a DVD recorder With a DVD recorder Recording dubbing images onto other video devices With a VCR To stop recording dubbing With a printer PictBridge Connect this unit to a printer Select the layout setting on page Layout Select the paper size setting on Paper SizeWhen you want to stop printing halfway Acrobat Reader With a computer WindowsWhat you can do with a computer Video editing software MotionSD Studio 1.2E End User License Agreement RAM Operating environmentMotionSD Studio 1.2E CPU Requirements Disc driveInterface Other Click Next Installing MotionSDInsert the CD-ROM into the computer Click MotionSD Studio 1.2E With a computer Reading the MotionSD Studio operating instructions Connection and recognition procedures Connect this unit and a computer If the driver has not been recognized properly If the driver has been recognized properly Drive icons About the computer displayExample folder structure Click at the very bottom of Tool BOX Using MotionSDStarting MotionSD Studio Closing MotionSD Studio To disconnect the USB cable safely Software uninstallation Copying still pictures onto the computer With a computer MacintoshTo disconnect USB cable safely Still picture recording menus MenusMenu list Motion picture recording menus Motion picture playback menus Play Setup Play Mode l 66 Resume Play l 67 Lock SET lStill picture playback menus Menus related to Setup Recording indications Demo ModeIndications Indications Playback indications 100 Confirmatory indications 101 Messages 102 About recovery Functions that cannot be used simultaneously Battery has worn out and can no longer be used Troubleshooting104 105 106 107 108 109 Others With a computer 110Cable is About this unit When carrying the unit, do not drop or bump it111 Prepare spare batteries when going out for recording About the batteryWhen you are not going to use the unit for an extended time Be sure to detach the battery after use About the SD card About the AC adaptor113 About condensation LCD monitor114 Auto focus Explanation of termsAutomatic white balance White balance Recording a subject in dark surroundings Concerning MPEG2 motion pictures116 Recording a subject behind a dirty or dusty window SD Video Camera Specifications117 USB 118 119 32 MB Number of recordable pictures on an SD card120 16 MB 121 Optional accessories 122 Accessory Order Form For USA Customers 123 Request for Service Notice USA Only 124 Limited Warranty For USA Customers 125 Carry-In, Mail-in Prepaid or In-Home Service 126 Customer Services Directory 127 Warranty For Canadian Customers 128 IndexNumerics 129 Warranty 130 Introducción/Remoción de la bateríaPara extraer la batería Cómo insertar/quitar una tarjeta SD Cambio de bateríaCómo encender la unidad Cómo apagar la unidad Pulse el botón de grabación para iniciar la grabación Grabación de imágenes dinámicasGrabación de imágenes fijas 132 Seleccione la escena a ser reproducida Pulse el cursor Reproducción de imágenes dinámicasReproducción de imágenes fijas 133 134 135 Panasonic Canada Inc Panasonic Puerto Rico, Inc