Connect this unit and a computer | Panasonic SDR-S10PC guide

With a computer

3Connect this unit and a computer.

A

AUSB cable (supplied)

≥Insert the plugs as far as they will go. The unit and computer will not operate properly if the plugs are not inserted fully.

≥Do not use any other USB connection cables except the supplied one.

(Operation is not guaranteed with any other USB cables.)

4Press the cursor button up or down to select

[PC CONNECT], then press the cursor button in the center.

5The [SD Browser auto start] screen appears.

≥If [Yes] is clicked,

MotionSD STUDIO starts. (l 92)

≥Click [No] if you do not want to start MotionSD STUDIO.

≥When the unit is connected to a computer, its power cannot be turned off.

In this case, disconnect the USB cable (l 93).

≥When a computer is accessing the card in this unit, the card access lamp

lights. ( appears on the LCD monitor.) Do not disconnect the USB cable or AC adaptor while the card is being accessed as it may damage the data.

≥It may be necessary to reboot the computer after connecting this unit to it for the first time.

89

VQT1D97

Image 89

Panasonic SDR-S10PC operating instructions Connect this unit and a computer

Contents

Model No.SDR-S10P/PC Thank you for choosing Panasonic Things You Should Know Following Applies only in Canada Following Applies only in the U.S.A Important Safety Instructions USE & Location Indemnity concerning recording content≥ do not AIM Your Camera AT the SUN or Other Bright Objects Care Battery pack Lithium ion battery pack BatteryCarefully observe copyright laws AC adaptor A./CANADA Consumers Attention For the purposes of these operating instructions Contents Specifications TroubleshootingOptional accessories Request for Service Notice USA Only Quick Guide To insert/remove the batteryBefore using How to turn on the power Charging the batteryHow to turn off the power Inserting/removing the SD card Press the record button Recording motion picturesRecording still pictures Still picture playback Motion picture playback Water resistance Features Shock proof CD-ROM AccessoriesParts identification and handling VQT1D97 Open them where water or sand About the Card/battery door and the Terminal cover Strap fixture Attaching to a tripodTo use as a grip belt Attach the 2-way hand strap 1 to this unit Adjust the angle of the LCD monitor as desired Using the LCD monitor Concerning the cards that can be used on this unit SD cardCapacity Recording About SD cards that you can use for motion picture recording SD Speed Class Rating Class Handling precautions Inserting the battery and charging the battery Power supply¬ Rotate the mode dial to select OFF Setup About charging errors Setup When the status indicator is off Connecting to the AC outletTo remove the battery Recordable time Charging time and recordable timeCharging time Selecting a mode Turning the unit on/off Selecting a modeSet the mode dial to , , or Set the mode dial to OFF To turn on the power How to turn the power on and off with the LCD monitorTo turn off the power Quick start Open the LCD monitor Close the LCD monitor while the mode dial is set to orTo cancel Quick start Insert/remove the SD card into/from the card slot Inserting/removing an SD card Card access lamp How to use the cursor buttonBasic operations Down Left Right Press to select the item Operations during playback Operations during recordingPress the cursor button up, left or right to select an item Press the cursor button up, down, left or right to operate Video recording mode About the operation icons displayed in each mode Setup Video playback mode Picture playback mode Setup Picture recording mode Press the cursor button right to select Help modeTo exit the help mode While stopped, press the Menu button Switching the languageUsing the menu screen To exit the menu screen To get back to the previous screen Changing the date and time display style Setting date and timeDATED/T OFF Adjusting the brightness and color level Adjusting the LCD monitorChanging the display style Brightness To cancel Power LCD Basic camera positioning Before recording About auto mode To end the recording Recording motion pictures Recording time elapsed Screen indications in the video recording modeRecording mode Remaining time left for recording 512 MB ≥ Recordable time using the battery l256 MB To record still pictures clearly Rotate the mode dial to select Press the record buttonRecording still pictures Picture quality for still picture recording Screen indications in picture recording modeRecording with a shutter operation effect Size of still pictures Remaining number of still pictures Digital zoom function ¬ Rotate the mode dial to select Press the zoom buttonZoom in/out function To use the zoom microphone function Backlight compensation functionPress the cursor button up to select ª To return to normal recording Fade in/fade out function To cancel fadingPress the cursor button left to select To select the color for fade in/out To cancel the MagicPix function Soft skin modeMagicPix function Press the cursor button up to select To cancel the soft skin mode Self-timer recordingTo stop the timer midway through Press the cursor button left to select Ø To cancel the Recording guideline function Wide modeRecording guideline function Recording images with a 169 aspect ratio Image stabilizer function To cancel the image stabilizer function Wind noise reduction function Scene modeTo cancel the wind noise reduction function To cancel the scene mode function To restore to the automatic adjustment Manual focus adjustment Under incandescent lamps Outdoor modeWhite balance Select and then fill the screen with a white subject To set the white balance manuallyAbout the white balance sensor a To restore to automatic adjustment Manual shutter speed/ aperture adjustmentShutter Speed Aperture Manual iris/gain adjustment Manual shutter speed adjustment Motion picture playback Rotate the mode dial to selectSelect the scene to be played back Press the cursor button in the center Slow-motion playback About motion picture compatibilityFast forward/rewind playback Playing back motion pictures by date To adjust the volumeFrame-by-frame playback Resuming the previous playback Select the file to be played back Still picture playback About still picture compatibility Deleting scenes EditingDeleting scenes one at a time Deleting multiple scenes from the thumbnail display To complete editing To continue deleting other scenesTo stop halfway through the deletion Locking scenes To complete the settings To cancel all Dpof settings Dpof settingWhat is DPOF? Formatting an SD card Card management Playback on TV With a TVStart playback on this unit With other products To display the on-screen information on the TV screen To watch images with a 169 aspect ratio on a regular TV Copying dubbing recordings onto a DVD recorder With a DVD recorder Recording dubbing images onto other video devices With a VCR To stop recording dubbing With a printer PictBridge Connect this unit to a printer When you want to stop printing halfway Select the paper size setting on Paper SizeSelect the layout setting on page Layout What you can do with a computer With a computer WindowsVideo editing software MotionSD Studio 1.2E Acrobat Reader End User License Agreement MotionSD Studio 1.2E Operating environmentCPU RAM Interface Disc driveOther Requirements Insert the CD-ROM into the computer Installing MotionSDClick MotionSD Studio 1.2E Click Next With a computer Reading the MotionSD Studio operating instructions Connection and recognition procedures Connect this unit and a computer If the driver has not been recognized properly If the driver has been recognized properly Example folder structure About the computer displayDrive icons Starting MotionSD Studio Using MotionSDClosing MotionSD Studio Click at the very bottom of Tool BOX To disconnect the USB cable safely Software uninstallation To disconnect USB cable safely With a computer MacintoshCopying still pictures onto the computer Menu list MenusMotion picture recording menus Still picture recording menus Still picture playback menus Play Setup Play Mode l 66 Resume Play l 67 Lock SET lMotion picture playback menus Menus related to Setup Indications Demo ModeIndications Recording indications Playback indications 100 Confirmatory indications 101 Messages 102 About recovery Functions that cannot be used simultaneously 104 TroubleshootingBattery has worn out and can no longer be used 105 106 107 108 109 Cable is 110Others With a computer 111 When carrying the unit, do not drop or bump itAbout this unit When you are not going to use the unit for an extended time About the batteryBe sure to detach the battery after use Prepare spare batteries when going out for recording 113 About the AC adaptorAbout the SD card 114 LCD monitorAbout condensation Automatic white balance Explanation of termsWhite balance Auto focus 116 Concerning MPEG2 motion picturesRecording a subject behind a dirty or dusty window Recording a subject in dark surroundings 117 SpecificationsSD Video Camera USB 118 119 120 Number of recordable pictures on an SD card16 MB 32 MB 121 Optional accessories 122 Accessory Order Form For USA Customers 123 Request for Service Notice USA Only 124 Limited Warranty For USA Customers 125 Carry-In, Mail-in Prepaid or In-Home Service 126 Customer Services Directory 127 Warranty For Canadian Customers Numerics Index128 129 Warranty Para extraer la batería Introducción/Remoción de la batería130 Cómo encender la unidad Cambio de bateríaCómo apagar la unidad Cómo insertar/quitar una tarjeta SD Grabación de imágenes fijas Grabación de imágenes dinámicas132 Pulse el botón de grabación para iniciar la grabación Reproducción de imágenes fijas Reproducción de imágenes dinámicas133 Seleccione la escena a ser reproducida Pulse el cursor 134 135 Panasonic Canada Inc Panasonic Puerto Rico, Inc