Setup
Setting date and time
When the unit is turned on for the first time, a message asking you to set the date and time will appear.
≥Select [YES] and press the cursor button in the center. Perform steps 2 and 3 below to set the date and time.
If the screen shows the incorrect date and time, then adjust it.
¬Rotate the mode dial to select
or 
.
1Press the MENU button, then select [BASIC] #
[CLOCK SET] # [YES] and then press the cursor button in the center.
2Press the cursor button left or right to select the item to be set. Then, press the button up or down to set the desired value.
≥The
3Press the cursor button in the center to enter the selection.
≥The clock function starts at
[00] seconds when the cursor button in the center is pressed.
≥After pressing the MENU button to finish the setting, check the date and time display.
∫Changing the date and time display style
Press the MENU button, then select [SETUP] # [DATE/TIME] # desired display style and then press the cursor button in the center.
[DATE][D/T]
DEC.15.2007 | DEC.15.2007 3:30 PM | |
|
|
|
[OFF]
≥The year will change as follows: 2000, 2001, ..., 2099, 2000, ...
40
