Setup
How to turn the power on and off with the LCD monitor
The power can be turned on and off with the LCD monitor when the mode dial is
set to 
or 
.
∫To turn on the power
Open the LCD monitor.
The status indicator lights and the power turns on.
∫To turn off the power
Close the LCD monitor.
The status indicator goes off and the power turns off. (If [QUICK START] is set to [ON], the unit goes into quick start standby mode and the status indicator flashes green.)
≥The power will not turn off while recording motion pictures even if the LCD monitor is closed.
Set the mode dial to OFF when the unit is not being used.
Quick start
When quick start is ON the battery power is still being consumed, even when the LCD monitor is closed.
This unit will resume recording/pause mode about 1.7 seconds after the LCD monitor is reopened.
≥When in quick start standby mode, about half of the power used in recording pause mode is being consumed, so the recording time will be reduced.
≥This is only activated in the following cases.
jWhile using the battery
When the mode dial is set to | or |
and an SD card is inserted. |
|
jWhile using the AC adaptor
When the mode dial is set to or 
, quick start can be used even if
an SD card is not inserted.
1Press the MENU button then select [SETUP] # [QUICK START] # [ON] and then press the cursor button in the center.
29
