Others
Problem
Check points
| ≥ The unit cannot be operated unless you open the LCD | |
This unit cannot be | monitor. | |
≥ Remove the SD card then press the RESET button. | ||
operated though it | (l109) If normal conditions are not restored yet, | |
is turned on. | ||
remove the battery or AC adaptor, wait about 1 minute | ||
| ||
This unit does not | and then reconnect the battery or AC adaptor. Then | |
about 1 minute later, turn on the power again. | ||
operate normally. | ||
(Conducting the above operation when the access | ||
| ||
| lamp is on may destroy the data on the card.) | |
| ≥ Has the demonstration started? | |
| # If you set [DEMO MODE] to [ON] without inserting a | |
The screen has | card in video recording mode or picture recording | |
mode, the unit is automatically set to the demonstration | ||
changed suddenly. | mode for introducing its functions. Normally this should | |
| be set to [OFF]. Press the MENU button, then select | |
| [SETUP] # [DEMO MODE] # [OFF] and press the | |
| cursor button in the center. | |
A function |
| |
indication such as |
| |
the remaining time | ≥ If you set [SETUP]>[DISPLAY]>[OFF], indications | |
indication or the | other than warnings and date indications disappear. | |
elapsed time | ||
| ||
indication is not |
| |
shown. |
| |
|
|
