Setup

Power supply

Inserting the battery and charging the battery

When this unit is purchased, the battery is not charged. Charge the battery before using this unit.

¬Rotate the mode dial to select OFF.

The battery will not be charged if the power is turned on.

Always use genuine Panasonic batteries (l 27).

1Slide the card/battery door lock to OPEN and then open the card/battery door.

When the card/battery door does not

open, place your finger on the [] part and open the card/battery door.

2Insert the battery until it clicks paying attention to the direction of the battery.

3Close the card/battery door and then slide the card/battery door lock to LOCK.

24

VQT1D97

Page 24
Image 24
Panasonic SDR-S10PC Power supply, Inserting the battery and charging the battery, ¬ Rotate the mode dial to select OFF