Recording

To set the white balance manually

1Select [ ] and then fill the screen with a white subject.

MNL

BACKK

2Press the cursor button up to select [ ].

MNL

BACK

When the [ ] display changes from flashing to on, setting is complete.

When the [ ] display continues flashing, the white balance cannot be set because the place is dark, etc. In this case, use the automatic white balance.

About the white balance sensor A

A

The white balance sensor detects the type of light source during recording.

Do not cover the white balance sensor during recording or it may not function properly.

When the [] display flashes, the manual white balance previously adjusted is stored.

Whenever recording conditions change, re-set the white balance for correct adjustment.

When setting both the white balance and the iris/gain, set the white balance first.

61

VQT1D97

Page 61
Image 61
Panasonic SDR-S10PC operating instructions To set the white balance manually, About the white balance sensor a