Operating environment, MotionSD Studio 1.2E | Panasonic SDR-S10PC

With a computer

Operating environment

≥A CD-ROM drive is necessary to install the supplied software.

≥When 2 or more USB devices are connected to a computer, or when devices are connected through USB hubs or by using extension cables, proper operation is not guaranteed.

≥Use the supplied USB cable when connecting to the computer. (Operation is not guaranteed with any other USB cables.)

≥Even if the system requirements mentioned in these operating instructions are fulfilled, some computers cannot be used.

≥This software is not compatible with Microsoft Windows 3.1, Windows 95, Windows 98/98SE, Windows Me and Windows NT.

≥Operation on an upgraded OS is not guaranteed.

≥Operation on an OS other than the one pre-installed is not guaranteed.

∫MotionSD STUDIO 1.2E

Personal	IBM PC/AT compatible personal computer
computer
OS	Microsoft Windows 2000 Professional Service Pack 4
	Microsoft Windows XP Home Edition Service Pack 2
	Microsoft Windows XP Professional Service Pack 2
CPU	Intel Pentium III 800 MHz or higher (including compatible CPU)
	(Intel Pentium 4 1.6 GHz or higher recommended)
RAM	256 MB or more (512 MB or more recommended)
Display	High Color (16 bit) or more (32 bit recommended)
	Desktop resolution of 1024k768 pixels or more (1280k1024
	pixels or more recommended)
	Graphic accelerator supporting DirectX 9.0b or 9.0c, and
	DirectDraw overlay
Free hard disk	Ultra DMA—33 or more (100 or more is recommended)
space	640 MB or more (When writing to DVD, the same amount of free
	space as the disc is necessary.)
Necessary	DirectX 9.0b or 9.0c
software	(If you install the software in a personal computer that is not
	compatible with DirectX 9.0b or 9.0c, the personal computer
	may stop operating properly. If you are unsure if your personal
	computer is compatible, contact the maker.)
	Windows Media Player 6.4 to 10
Sound	DirectSound Support

84

VQT1D97

Image 84

Panasonic SDR-S10PC operating instructions Operating environment, MotionSD Studio 1.2E, Cpu, Ram

Contents

Model No.SDR-S10P/PC Things You Should Know Thank you for choosing Panasonic Following Applies only in the U.S.A Following Applies only in Canada Important Safety Instructions Indemnity concerning recording content USE & Location≥ do not AIM Your Camera AT the SUN or Other Bright Objects Care Battery Battery pack Lithium ion battery packCarefully observe copyright laws AC adaptor For the purposes of these operating instructions A./CANADA Consumers Attention Contents Troubleshooting SpecificationsOptional accessories Request for Service Notice USA Only To insert/remove the battery Before usingQuick Guide Charging the battery How to turn on the powerHow to turn off the power Inserting/removing the SD card Recording motion pictures Recording still picturesPress the record button Motion picture playback Still picture playback Features Water resistance Shock proof Accessories Parts identification and handlingCD-ROM VQT1D97 About the Card/battery door and the Terminal cover Open them where water or sand Attaching to a tripod Strap fixtureTo use as a grip belt Attach the 2-way hand strap 1 to this unit Using the LCD monitor Adjust the angle of the LCD monitor as desired SD card Concerning the cards that can be used on this unitCapacity Recording About SD cards that you can use for motion picture recording Handling precautions SD Speed Class Rating Class Power supply Inserting the battery and charging the battery¬ Rotate the mode dial to select OFF Setup About charging errors Connecting to the AC outlet To remove the batterySetup When the status indicator is off Charging time and recordable time Charging timeRecordable time Selecting a mode Selecting a mode Turning the unit on/offSet the mode dial to , , or Set the mode dial to OFF How to turn the power on and off with the LCD monitor To turn on the powerTo turn off the power Quick start Close the LCD monitor while the mode dial is set to or To cancel Quick startOpen the LCD monitor Inserting/removing an SD card Insert/remove the SD card into/from the card slot How to use the cursor button Card access lampBasic operations Down Left Right Press to select the item Operations during recording Operations during playbackPress the cursor button up, left or right to select an item Press the cursor button up, down, left or right to operate About the operation icons displayed in each mode Video recording mode Setup Video playback mode Setup Picture recording mode Picture playback mode Help mode To exit the help modePress the cursor button right to select Switching the language Using the menu screenWhile stopped, press the Menu button To get back to the previous screen To exit the menu screen Setting date and time Changing the date and time display styleDATED/T OFF Adjusting the LCD monitor Adjusting the brightness and color levelChanging the display style Brightness To cancel Power LCD Before recording Basic camera positioning About auto mode Recording motion pictures To end the recording Screen indications in the video recording mode Recording mode Remaining time left for recordingRecording time elapsed ≥ Recordable time using the battery l 256 MB512 MB Rotate the mode dial to select Press the record button Recording still picturesTo record still pictures clearly Screen indications in picture recording mode Picture quality for still picture recordingRecording with a shutter operation effect Size of still pictures Remaining number of still pictures ¬ Rotate the mode dial to select Press the zoom button Zoom in/out functionDigital zoom function Backlight compensation function To use the zoom microphone functionPress the cursor button up to select ª To return to normal recording To cancel fading Fade in/fade out functionPress the cursor button left to select To select the color for fade in/out Soft skin mode To cancel the MagicPix functionMagicPix function Press the cursor button up to select Self-timer recording To cancel the soft skin modeTo stop the timer midway through Press the cursor button left to select Ø Wide mode To cancel the Recording guideline functionRecording guideline function Recording images with a 169 aspect ratio To cancel the image stabilizer function Image stabilizer function Scene mode To cancel the wind noise reduction functionWind noise reduction function To cancel the scene mode function Manual focus adjustment To restore to the automatic adjustment Outdoor mode White balanceUnder incandescent lamps To set the white balance manually About the white balance sensor aSelect and then fill the screen with a white subject Manual shutter speed/ aperture adjustment To restore to automatic adjustmentShutter Speed Aperture Manual shutter speed adjustment Manual iris/gain adjustment Rotate the mode dial to select Motion picture playbackSelect the scene to be played back Press the cursor button in the center About motion picture compatibility Fast forward/rewind playbackSlow-motion playback To adjust the volume Frame-by-frame playbackPlaying back motion pictures by date Resuming the previous playback Still picture playback Select the file to be played back About still picture compatibility Editing Deleting scenesDeleting scenes one at a time Deleting multiple scenes from the thumbnail display To continue deleting other scenes To stop halfway through the deletionTo complete editing To complete the settings Locking scenes Dpof setting What is DPOF?To cancel all Dpof settings Card management Formatting an SD card With a TV Playback on TVStart playback on this unit With other products To watch images with a 169 aspect ratio on a regular TV To display the on-screen information on the TV screen With a DVD recorder Copying dubbing recordings onto a DVD recorder With a VCR Recording dubbing images onto other video devices With a printer PictBridge To stop recording dubbing Connect this unit to a printer Select the paper size setting on Paper Size Select the layout setting on page LayoutWhen you want to stop printing halfway With a computer Windows What you can do with a computerVideo editing software MotionSD Studio 1.2E Acrobat Reader End User License Agreement Operating environment MotionSD Studio 1.2ECPU RAM Disc drive InterfaceOther Requirements Installing MotionSD Insert the CD-ROM into the computerClick MotionSD Studio 1.2E Click Next With a computer Connection and recognition procedures Reading the MotionSD Studio operating instructions Connect this unit and a computer If the driver has been recognized properly If the driver has not been recognized properly About the computer display Drive iconsExample folder structure Using MotionSD Starting MotionSD StudioClosing MotionSD Studio Click at the very bottom of Tool BOX Software uninstallation To disconnect the USB cable safely With a computer Macintosh Copying still pictures onto the computerTo disconnect USB cable safely Menus Menu listMotion picture recording menus Still picture recording menus Play Setup Play Mode l 66 Resume Play l 67 Lock SET l Motion picture playback menusStill picture playback menus Menus related to Setup Demo Mode IndicationsIndications Recording indications Playback indications Confirmatory indications 100 Messages 101 About recovery 102 Functions that cannot be used simultaneously Troubleshooting Battery has worn out and can no longer be used104 105 106 107 108 109 110 Others With a computerCable is When carrying the unit, do not drop or bump it About this unit111 About the battery When you are not going to use the unit for an extended timeBe sure to detach the battery after use Prepare spare batteries when going out for recording About the AC adaptor About the SD card113 LCD monitor About condensation114 Explanation of terms Automatic white balanceWhite balance Auto focus Concerning MPEG2 motion pictures 116Recording a subject behind a dirty or dusty window Recording a subject in dark surroundings Specifications SD Video Camera117 118 USB 119 Number of recordable pictures on an SD card 12016 MB 32 MB Optional accessories 121 Accessory Order Form For USA Customers 122 Request for Service Notice USA Only 123 Limited Warranty For USA Customers 124 Carry-In, Mail-in Prepaid or In-Home Service 125 Customer Services Directory 126 Warranty For Canadian Customers 127 Index 128Numerics Warranty 129 Introducción/Remoción de la batería 130Para extraer la batería Cambio de batería Cómo encender la unidadCómo apagar la unidad Cómo insertar/quitar una tarjeta SD Grabación de imágenes dinámicas Grabación de imágenes fijas132 Pulse el botón de grabación para iniciar la grabación Reproducción de imágenes dinámicas Reproducción de imágenes fijas133 Seleccione la escena a ser reproducida Pulse el cursor 134 135 Panasonic Puerto Rico, Inc Panasonic Canada Inc