12
Control Panel
control panel2
- Used to enter a pause when recording or
dialing a telephone number, or to redial
the last dialed number.
- Used to start Abbreviated Dialing.
(See pages 49 and 54)
- Used to separate the Sub-Address from
the telephone number
- Used to start On-Hook Dialing. (See page 57)
- Used to switch the machine into energy saving mode. (See page 38)
- Used to set the Contrast to Normal,
Lighter or Darker. (See page 42)
- Used to set the Resolution to Standard, Fine,
Super-Fine or Halftone. (See page 42)
- Used to turn the verification stamp ON or OFF.
Lights when the verification stamp is set to ON.
- Blinks when the machine is transmitting or receiving a document.
- Lights when trouble occurs.
Keypad
- Used for manual number dialing,
recording phone numbers, and
numerical entries.
Tone Key
- Used to temporarily change the
dialing mode to Tone when Pulse
mode is set.