Loading Documents
41
Basic Operations
1. Be sure the document(s) is free of staples, paper clips and is not torn, greasy or covered by foreign objects.
2. Place the docum ent(s) FACE D OWN on the Automat ic Document Feeder (ADF) until the leading edge
placed into the machine s tops.
If you are sending mult iple pages, make sure that th e bottom sh e e t enters fi r st. You can also stack up
to 50 PAGES on the ADF at one time by setting the docum ents as stairs shape as the fig ure below.
If you have more than 50 pages, wait until tran smission or storing in memory starts as pages feed
through, place any remaining pages on top of the last page in the feeder.
3. Adjust the Document Guides to center the document on the ADF.
When you set a document on the ADF, the display message will change from date and time (standby) to
the following message. You can now change basic transmission settings, or begin the dialing procedure.
ENTER STATIO N(S)
THEN PRESS S TART 00%
NOTE 1. The document limitation to send multiple pages is as follows.
* Please note that although the size and thickness meets the specifications, you might not be
able to set 50 pages with some types of papers.
2. Transmitting documents longer than 14 in (356 mm) requires user's assistance.
3. When transmitting documents longer than Letter size (8.5 x 11 in), please extend the sub-tray
as shown below.
How to Load Documents
Document Size Document Thickness
Up to 20 pages Up to 10.1 x 14.3 in (257 x 364 mm) 0.0024 - 0.0048 in
Up to 50 pages* A4 or Letter size 0.0024 - 0.0039 in
CORRECT INCORRECT
Document Guides
Document Sub Tray