Receiving Documents
69
Basic Operations
If the recording paper r uns out or jams or if the toner runs out during r eception, the machine automati cally
starts receiving documents into its image data memory. Stored documents are printed automatically after
replacing the recording paper or the toner cartridge. (See Note 1 and 2)
The printing mechanism of the machine is a Reverse Order Stacking construction. The machine has Print
Collation Mode that stacks received documents in the correct order. When the Print Collation Mode is
enabled, all received documents are stored into memory first, then printed out in Correct Order Stacking.
The requirements for the Print Collation Mode to be active are: 1) Fax Parameter No. 65 (PRINT
COLLATION) set to “Valid”, and 2) eno ugh remaining memory.
The unit will print in Reverse Order Stacking (Non-Collation Mode) whenever one of the above requirements
is not met.
NOTE 1. If the memory overflows, the machine will stop receiving and release the communication line.
The document(s) stored in the memory up to that moment will be printed out.
2. If you wish to turn off the substitute reception function, change the setting of Fax Parameter
No. 22 to "Invalid". (See page 37)
Substitute Memory Reception
1When the machine fini shes the memory reception and
there is no recording paper or toner, an Information Code
appears on the display.
NO RECORDING PAPER
INFO. CODE= 010
OUT OF TONER
INFO. CODE= 041
2Install the recording paper (See page 18) or replace the
toner cartridge (See page 16).
The machine will autom atically start printing the docum ent
stored in the memory.
* PRINTING *
MEMORY RCV’D DOC
Print Collation Mode
Sending Document Order Stacking Document Order
3
2
1
Correct Order Stacking
(Collation Mode)
3
2
1
Reverse Order Stacking
(Non-Collation Mode)
1
2
3