Panasonic UF-6000 appendix Setting the Fax / Tel Auto Switching Mode, If it is a Fax call

Receiving Documents

Fax / Tel Auto Switching Mode

When your machine is set to this mode, your machine will switch to document reception or voice communication automatically.

Setting the Fax / Tel Auto Switching Mode

1	Change Fax Parameter No. 17 (RECEIVE MODE) to 3: Fax / Tel SW.
	(See page 36)

Operation of Fax / Tel Auto Switching Mode

If it is a Fax call,

1

2

Your machine will answer the call when a call is received, then distinguish whether it is a voice or fax call.

Your machine begins to receive the documents.

If it is a Voice call,

1

2

3

4

Your machine will answer the call when a call is received, then distinguish whether it is a voice or fax call.

Your machine begins to signal (Ringing) through the machine's speaker for your attention. (See Note 1)

Lift the handset of the External Telephone and press

STOP .

Begin the conversation.

NOTE

1.The length of time the machine signals can be changed by Fax Parameter No.18 (OP CALL TIMER) (See page 37).

2.To adjust the Ringer Volume refer to page 25.

64