Panasonic UF-780/790 operating instructions On the next

Customizing Your Machine

Fax Parameter Table

No.	Parameter	Setting	Setting	Comments
		Number
18	OPERATOR CALL	*1	20 sec.	Selecting the length of time that your machine signals
	TIMER			(rings) for an incoming voice call in Fax/Tel Auto Switching
		2	30 sec.
				mode. (See page 64)
		3	40 sec.
		4	50 sec.
19	OGM LENGTH	1	1 sec.	Setting for the OGM length of your TAM from 1 to 60
	(TAM I/F)			seconds. The machine will not start to detect SILENCE
		---	---
				until the time setting has lapsed.
		60	60 sec.	(Default = 20 sec.)
20	SILENT DETECTION	1	Invalid	Selecting the Silent Detection Mode.
	(TAM I/F)
		*2	Valid
22	SUBSTITUTE RCV	1	Invalid	Selecting whether the machine receives to memory when
				recording paper runs out, toner runs out or recording paper
		*2	Valid
				is jammed.
23	RECORDING PAPER	1	A4	Setting the recording paper size loaded in your machine.
	SIZE
		*2	Letter
		3	Legal
24	PRINT REDUCTION	1	Fixed	Selecting print reduction mode.
				Fixed:Reduce received document according to setting of
		*2	Auto
				Parameter No. 25.
				Auto : Reduce received document according to the length
				of received documents.
25	REDUCTION RATIO	70	70%	Selecting fixed print reduction ratio from 70% to 100%.
				This parameter functions only when fixed print reduction is
		----	----
				selected on Fax Parameter No. 24.
		*100	100%
26	POLLING PASSWORD		(----)	Setting a 4-digit password for secured polling.
27	POLLED FILE SAVE	*1	Invalid	Selecting whether the machine retains the polled
				document in memory even after the document is polled
		2	Valid
				once.
28	STAMP AT MEM. XMT	1	Invalid	Selecting whether the machine stamps the original
				documents when storing the documents into memory.
		*2	Valid
				(Depending on the Stamp setting on the Control Panel)
31	INCOMPLETE FILE	*1	Invalid	Selecting whether the machine retains the document in
	SAVE			memory if the document is not successfully transmitted.
		2	Valid
32	COPY REDUCTION	1	Manual	Selecting whether the machine performs the copy
				reduction ratio automatically or manually.
		*2	Auto
				Manual : The machine will prompt you for the Zoom ratio
				(100% to 70%) when making copies.
				Auto : The machine will automatically determine the
				reduction ratio according to the length of the
				original document.

Programming Your Machine

Continued on the next page... 37