Panasonic UF-780/790 operating instructions Fax Parameter Table, Parameter Setting Comments Number

Customizing Your Machine

Fax Parameter Table

No.	Parameter	Setting	Setting		Comments
		Number
01	CONTRAST	*1	Normal	Setting the home position of the CONTRAST key.
		2	Lighter
		3	Darker
02	RESOLUTION	*1	Standard	Setting the home position for the RESOLUTION.
		2	Fine
		3	S-Fine
		4	Halftone
			(Fine)
		5	Halftone
			(S-Fine)
04	STAMP	*1	Off	Setting the home position of the STAMP key.
				To select the stamp function when document is stored in
		2	On
				memory, see Fax Parameter No. 28.
05	MEMORY	1	Off	Setting the home position for memory transmission/copy
				mode. (This setting can be temporarily changed by using
		*2	On
				F8-9 (MEMORY XMT))
06	DIALING METHOD	1	Pulse	Selecting the dialing method.
		*2	Tone
07	HEADER PRINT	*1	Inside	Selecting the printing position of the header.
				Inside : Inside TX copy area.
		2	Outside
				Outside : Outside TX copy area.
		3	No print	No print : Header is not printed.
08	HEADER FORMAT	*1	Logo, ID No.	Selecting the header format.
		2	From To
09	RCV'D TIME PRINT	*1	Invalid	Selecting whether the machine prints the received date &
				time, remote ID, percentage of reduction and page number
		2	Valid
				on the bottom of each received page.
10	KEY/BUZZER	1	Off	Selecting the volume of the Key/Buzzer tone.
	VOLUME
		*2	Soft
		3	Loud
12	COMM. JOURNAL	1	Off	Selecting the home position of printout mode for COMM.
				Journal Off/Always/INC.
		2	Always
				Off	: Does not print
		*3	Inc. only	Always	: Always prints
				Inc. only : Prints only when communication has failed.
13	AUTO JOURNAL	1	Invalid	Selecting whether the machine prints the journal
	PRINT			automatically after every 32 transactions.
		*2	Valid
17	RECEIVE MODE	1	TEL	Setting the receive mode.
		*2	FAX
		3	FAX/TEL
			SW.
		4	TAM/FAX

36