Configuring the network settings [Network setup]
The network settings and the settings relating to DDNS (Dynamic DNS) and SNMP (Simple Network management Protocol) can be configured on this page.
The "Network setup" page has 3 tabs of the [Network] tab, the [DDNS] tab, the [SNMP] tab and the [FTP] tab.
Configure the network settings [Network]
Click the [Network] tab on the "Network setup" page.
The following information is required to configure the network settings.
Contact the network administrator or your Internet service provider.
•IP address
•Net mask
•Default gateway (when using the gateway server/router)
•HTTP port
•Primary DNS, Secondary DNS (when using DNS)
[DHCP]
Select "ON" or "OFF" to determine whether or not to use the DHCP function.
Default: OFF
[IP address]
When not using the DHCP function, enter the IP address of the camera. Do not enter the IP address already in use (for the PCs and the other network cam- eras).
Default: 192.168.0.10
<Unavailable IP addresses>
0.*.*.* *.*.*.0
255.*.*.* *.*.*.255 127.0.0.1
Class D address (224.0.0.0 - 239.255.255.255) Class E address (240.0.0.0 - 255.255.255.255)
[Net mask]
When not using the DHCP function, enter the net mask of the camera.
Default: 255.255.255.0
[Default gateway]
When not using the DHCP function, enter the default gateway of the camera.
Default: 192.168.0.1
<Unavailable IP addresses for the default gate- way>
0.*.*.* *.*.*.0
255.*.*.* *.*.*.255 127.0.0.1
Class D address (224.0.0.0 - 239.255.255.255) Class E address (240.0.0.0 - 255.255.255.255)
39
