Manuals / Paxar / Computer Equipment / Printer

Paxar 4 manual LED Indicator, Operator’s Handbook

Models: 4

1 54

Download 54 pages 11.95 Kb

Page 39

9490 Operator’s Handbook

The test label displays the following information:

✦Model number (Model:)

✦Software version (Software:)

✦Number of supplies printed (Stock CNT:)

✦Communication settings (COM:)

✦Printhead information (AVG PH RS:)

✦Test pattern.

Turn the printer off and then back on to return to normal printing.

For more information on troubleshooting, see your MPCL II Programmer’s Manual.

LED Indicator ––––––––––––––––––––––––––––––––––––––––––––––

This table explains the meanings of various LED states. Use the color of the LED and whether it is solid, blinking slowly, or blinking rapidly to determine the meaning of the indicator.

LED States	Solid	Fast Blink	Slow Blink
		(1⁄4 second)	(2 seconds)
GREEN	Ready...	Label Ready	Low Battery
	On-Demand

AMBER	Ready...	Packet Syntax	Printhead
	Continuous	Error	Hot...Wait

AMBER/	N/A	Hardware	Imaging
GREEN		Error or printer	Error
		failure

Your System Administrator can use Status Polling, an online diagnostic command, to get a more specific description of the printer error. See your MPCL II Programmer’s Manual for information about Status Polling.

5-2	TC9490OH Rev. C 3/97

Image 39

Paxar 4 manual LED Indicator, Operator’s Handbook

Contents

1995 Monarch Marking Systems, Inc. All rights reserved Operator’s HandbookMonarch Renegade 4 Printer TC9490OH Rev. CB 3/01Trademarks CANADIAN D.O.C. WARNINGPage Table of Contents 9490 Operator’s Handbook Chapter Getting StartedAdditional Optional Manuals Charging the Battery Audience9490 Operator’s Handbook Chapter 1. Getting Started 9490 Operator’s Handbook To charge the batteryLoading and Removing the Battery Chapter 1. Getting StartedLatch Tab Finger Depression 9490 Operator’s Handbook Connecting the AC Power SupplyChapter 1. Getting Started Connecting the Shoulder Strap9490 Operator’s Handbook Using the Trigger and LEDLoading Supplies Opening the PrinterChapter 2. Pull the supply guide forward and down as shown 3. Tip the printhead assembly up and over the platen roller as shownPrinthead Assembly Platen Roller Pinch Rollers Peel Bar 9490 Operator’s HandbookLatches Chapter 2. Loading SuppliesPrinthead Assembly 4. Slide the latches on the back of the printer toward the center9490 Operator’s Handbook Loading RibbonChapter 2. Loading Supplies Reloading a Ribbon Cassetten Do Not wrinkle or crush the ribbon 9490 Operator’s HandbookLoading for Peel Mode Loading SuppliesChapter 2. Loading Supplies 9490 Operator’s Handbook Supply Holder Arrow Width of Supply TabsTC9490OH Rev. C 3/97 TC9490OH Rev. C 3/97 Chapter 2. Loading Suppliesn Make sure the labels turn freely in the supply well Supply Holder5. Close the printer and turn the printer on 9490 Operator’s HandbookLoading for Non-Peel Mode 2-11Chapter 2. Loading Supplies Supply Holder 9490 Operator’s Handbookn Make sure the supplies turn freely in the supply well 2-122-13 Chapter 2. Loading SuppliesSupply Guide Upper Opening Lower Opening 9490 Operator’s Handbook 2-14TC9490OH Rev. C 3/97 Chapter Connecting the Communications CablePrinting Establishing Communications9490 Operator’s Handbook Removing the Communications CablePrinting in On-Demand Mode Communication ValuesChapter 3. Printing Printing in Continuous Mode Interrupting a Print Job9490 Operator’s Handbook TC9490OH Rev. C 3/97 Chapter 4. Care and MaintenanceThis chapter tells you how to clear label jams clean the battery contacts9490 Operator’s Handbook Clearing Label JamsCorrect Print CleaningChapter 4. Care and Maintenance Voids9490 Operator’s Handbook Cleaning the Battery ContactsTC9490OH Rev. C 3/97 Chapter 4. Care and Maintenance4. Reload the battery Battery Contacts EraserTC9490OH Rev. C 3/97 9490 Operator’s HandbookTroubleshooting Printing a Test LabelChapter 9490 Operator’s Handbook LED IndicatorSolution Problems and SolutionsChapter 5. Troubleshooting ProblemAddressing a Monarch 9490 Printer ProblemSolution 9490 Operator’s HandbookUsing the Boot Putting the Boot on the PrinterChapter 9490 Operator’s Handbook 4. With Shoulder Strap Only. For both sides of the printer, put together the knob assembly and screw it into the threaded insert. Do not over-tighten the assemblyChapter 6. Using the Boot Taking the Boot off the PrinterTC9490OH Rev. C 3/97 9490 Operator’s HandbookAttaching the Cable Cover Chapter 7. Using the Cable Cover9490 Operator’s Handbook Removing the Cable CoverSpecifications SpecificationsChapter Accessories and Options Supply Sizes9490 Operator’s Handbook Direction Chapter 8. SpecificationsCable Pin Outs DescriptionTC9490OH Rev. C 3/97 9490 Operator’s HandbookOn-demand mode GlossaryContinuous mode non-peel modeDirect communication between a computer Administratorerrors, and run diagnostics onlinePrinted in the U.S.A For supplies, service, or assistance callTOLL FREE Published by the Technical Communications Department