Manuals / Paxar / Computer Equipment / Printer

Paxar manual Operator’s Handbook, Problem, Solution, Addressing a Monarch 9490 Printer

Models: 4

1 54

Download 54 pages 11.95 Kb

Page 41

9490 Operator’s Handbook

	Problem	Solution

	Printer does not	Check battery.
	feed.
	feed.	Reload supplies.
		Reload supplies.

		Verify that the ribbon is not out and that a
		label is not jammed in the label path.

	Slow or sluggish	Make sure supplies are loaded correctly.
	feeding.
	feeding.	Check for adhesive build-up in the feed
		Check for adhesive build-up in the feed
		path and on the peel blade.

	Label Jam.	Remove jammed supplies.

		Clean the printer.

	Battery won’t	Make sure battery is connected correctly.
	charge.
	charge.	Make sure charger is plugged into a live
		Make sure charger is plugged into a live
		outlet.

	No LED.	Make sure power is on.

		Check battery.

		Make sure the power supply is connected
		to the printer and plugged into a live outlet.

	Printer does not	Check battery.
	respond.
	respond.	Check communication settings.
		Check communication settings.

		Check communications cable.

		Print a test label. If you see ADDRESS:
		your printer has an address assigned.
		If you are not using the Mobile Printing
		Station, remove the address. See
		Addressing a Monarch® 9490 Printer
		addendum (TCMPCLIDAD) for more
		information or call Technical Support.

5-4	TC9490OH Rev. C 3/97

Image 41

Paxar manual Operator’s Handbook, Problem, Solution, Addressing a Monarch 9490 Printer

Contents

Monarch Renegade 4 Printer Operator’s HandbookTC9490OH Rev. CB 3/01 1995 Monarch Marking Systems, Inc. All rights reservedTrademarks CANADIAN D.O.C. WARNINGPage Table of Contents 9490 Operator’s Handbook Additional Optional Manuals ChapterGetting Started 9490 Operator’s Handbook Charging the BatteryAudience Chapter 1. Getting Started 9490 Operator’s Handbook To charge the batteryLatch Tab Finger Depression Loading and Removing the BatteryChapter 1. Getting Started 9490 Operator’s Handbook Connecting the AC Power SupplyChapter 1. Getting Started Connecting the Shoulder Strap9490 Operator’s Handbook Using the Trigger and LEDChapter Loading SuppliesOpening the Printer Printhead Assembly Platen Roller Pinch Rollers Peel Bar 3. Tip the printhead assembly up and over the platen roller as shown9490 Operator’s Handbook 2. Pull the supply guide forward and down as shownPrinthead Assembly Chapter 2. Loading Supplies4. Slide the latches on the back of the printer toward the center Latches9490 Operator’s Handbook Loading RibbonChapter 2. Loading Supplies Reloading a Ribbon Cassetten Do Not wrinkle or crush the ribbon 9490 Operator’s HandbookChapter 2. Loading Supplies Loading for Peel ModeLoading Supplies TC9490OH Rev. C 3/97 9490 Operator’s HandbookSupply Holder Arrow Width of Supply Tabs n Make sure the labels turn freely in the supply well Chapter 2. Loading SuppliesSupply Holder TC9490OH Rev. C 3/975. Close the printer and turn the printer on 9490 Operator’s HandbookChapter 2. Loading Supplies Loading for Non-Peel Mode2-11 n Make sure the supplies turn freely in the supply well 9490 Operator’s Handbook2-12 Supply HolderSupply Guide Upper Opening Lower Opening 2-13Chapter 2. Loading Supplies TC9490OH Rev. C 3/97 9490 Operator’s Handbook2-14 Printing Connecting the Communications CableEstablishing Communications Chapter9490 Operator’s Handbook Removing the Communications CableChapter 3. Printing Printing in On-Demand ModeCommunication Values 9490 Operator’s Handbook Printing in Continuous ModeInterrupting a Print Job This chapter tells you how to clear label jams Chapter 4. Care and Maintenanceclean the battery contacts TC9490OH Rev. C 3/979490 Operator’s Handbook Clearing Label JamsChapter 4. Care and Maintenance CleaningVoids Correct Print9490 Operator’s Handbook Cleaning the Battery Contacts4. Reload the battery Chapter 4. Care and MaintenanceBattery Contacts Eraser TC9490OH Rev. C 3/97TC9490OH Rev. C 3/97 9490 Operator’s HandbookChapter TroubleshootingPrinting a Test Label 9490 Operator’s Handbook LED IndicatorChapter 5. Troubleshooting Problems and SolutionsProblem SolutionSolution Problem9490 Operator’s Handbook Addressing a Monarch 9490 PrinterChapter Using the BootPutting the Boot on the Printer 9490 Operator’s Handbook 4. With Shoulder Strap Only. For both sides of the printer, put together the knob assembly and screw it into the threaded insert. Do not over-tighten the assemblyChapter 6. Using the Boot Taking the Boot off the PrinterTC9490OH Rev. C 3/97 9490 Operator’s HandbookAttaching the Cable Cover Chapter 7. Using the Cable Cover9490 Operator’s Handbook Removing the Cable CoverChapter SpecificationsSpecifications 9490 Operator’s Handbook Accessories and OptionsSupply Sizes Cable Pin Outs Chapter 8. SpecificationsDescription DirectionTC9490OH Rev. C 3/97 9490 Operator’s HandbookContinuous mode Glossarynon-peel mode On-demand modeerrors, and run diagnostics Administratoronline Direct communication between a computerTOLL FREE For supplies, service, or assistance callPublished by the Technical Communications Department Printed in the U.S.A