USING SHORTCUT CONTROLS FOR PTZ OPERATIONS
PAN TO ZERO
To pan the camera back to its zero position:
1.
2.Select Operations.
3.Select “Pan to Zero.” The camera is repositioned at its zero position. This position is determined by the position of the camera at installation.
.
Figure 19. Pan to Zero
ROTATE THE CAMERA
To rotate the camera 180 degrees:
1.Right click in the video pane to display the shortcut menu.
2.Select Operations.
3.Select Rotate 180 Degrees.
USING PATTERNS, PRESETS, AND SCANS
The DVR5100 allows you to activate patterns, presets, and scans, which can be activated automatically or manually from the DVR5100. Patterns and presets must be programmed by the system administrator before they can be executed.
PATTERNS
A pattern is a
Programming a Pattern
To program a PTZ pattern using an on-screen shortcut menu:
1.While in live view mode,
2.Click Pattern > Record Pattern > Modify Pattern. The Modify Pattern screen appears (refer to Figure 20).
25 |
