Pelco 2 C1696M-A (7/08) manual Appendix a Front Panel Indicators, Pelco Badge power indicator

Appendix A: Front Panel Indicators

Figure 55 shows the DVR5100 front panel.

￿ ￿￿

￿ ￿ ￿

￿

￿￿ ￿ ￿

Figure 55. DVR5100 Front Panel Indicators

Table H lists the DVR5100 front panel controls and indicators:

Table H. DVR5100 Front Panel Features

Pelco Badge (power indicator) :

The Pelco badge, on the left side of the unit, glows blue when the unit has power. Behind the front bezel, the power indicator LED is white.

DVD: The DVD drive that allows you to import/export video to and from the DVR, and load/install DVR software updates.

USB Port: Connect the USB PC keyboard and mouse, or insert a USB device to capture snapshots and exported video clips.

Control Pad: Controls the basic unit operations with the following features: function buttons, Joystick, Plus (+) and Minus (-), Enter/Shift, Menu, Jog (inner dial), and Shuttle (outer ring).

Hard Disk Drive Indicator		: The hard disk drive (HDD) status indicator flashes yellow when there is HDD activity.
Network Activity Indicator		: The network activity indicator flashes green when the unit is sending or receiving network
data.
Power Button	: Use the power button to turn the unit on or off.
Network Status Indicator		: The network status LED indicates the network connection and speed. It may display one of the
following conditions:

•Off: The unit is not connected to the network.

•Solid Green: The unit is connected to the network using the 1000Base-T standard.

•Solid Yellow: The unit is connected to the network using the 100Base-T standard.

•Solid Red: The unit is connected to the network using the 10Base-T standard.

Unit Status Indicator : The unit status is indicated by one of the following three colors:

•Green: The unit is functioning normally.

•Yellow: The unit is in configuration mode.

•Red: The unit is in an error condition.

Configuration/Reset Key: Reserved for future use.

48 C1696M-A (7/08)